CV500BI111 Omron, CV500BI111 Datasheet - Page 136

• Manufacturer Part Number: CV500BI111
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500BI111

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

What Are Data Links?
Note
1. Automatic data link creation with 1:N allocations can only be used with the
2. Controller Link Units and Support Boards other than those listed above
3. The Controller Link Support Board (3G8F7-CLK21-V1 and 3G8F7-CLK23-
4. For automatic data link creation with 1:N allocations, use the CX-Integra-
• There are three types of 1:N allocations.
• Programming Devices (including Programming Consoles) are used to set
• Node 1 is the master node.
• Areas 1 and 2 can be selected from bit-access areas or the DM Area.
• The send area sizes of the master and slave nodes are the same for each
• Send nodes are in the same ascending order as node numbers.
• All nodes can be specified to either participate or not participate in the
• The data link areas (data link start words) are common to all nodes partic-
the automatic data link mode in the DM Parameter Area of the PLC used
as the startup node.
area.
data link.
ipating in the data links.
following Controller Link Units and Support Boards:
cannot participate in 1:N allocation data links. They can, however, join the
network if a parameter in the DM Parameter Area is set so that they do not
participate in the data links.
E) can be used in automatic data link creation with 1:N allocations, but it
cannot be the startup node. Use a Controller Link Unit (CS1W-CLK21-V1,
CS1W-CLK23, CJ1W-CLK21-V1, or CJ1W-CLK23) on the same network
as the startup node.
tor.
Wired networks
Area 1
Area 2
Type
Node 1
1
2
3
4
1
2
3
4
CS1W-CLK21-V1 and CS1W-CLK23 (for CS Series)
CJ1W-CLK21-V1 and CJ1W-CLK23 (for CJ Series)
3G8F7-CLK21-V1 and 3G8F7-CLK23-E (for PCI bus)
Node 2
1
2
1
2
Node 3
1
3
1
3
Model
Node 4
1
4
1
4
Section 5-1
111