CV500BI111 Omron, CV500BI111 Datasheet - Page 23

• Manufacturer Part Number: CV500BI111
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500BI111

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5
xxiv
Applications Precautions
Applications Precautions
!WARNING
!Caution Failure to abide by the following precautions could lead to faulty operation or
Observe the following precautions when using the Controller Link Unit.
Failure to abide by the following precautions could lead to serious or possibly
fatal injury. Always heed these precautions.
the PLC or the system or could damage the PLC or PLC Units. Always heed
these precautions.
• Always ground the system to 100 Ω or less when installing the system to
• Always turn OFF the power supply or the backup power supply to the PLC
• Always use the power supply voltages specified in the operation manuals.
• Take appropriate measures to ensure that the specified power with the
• Install external breakers and take other safety measures against short-cir-
• Separate the line ground terminal (LG) from the functional ground termi-
• Do not attempt to disassemble, repair, or modify any Units. Any attempt to
• Install the Units properly as specified in the operation manuals. Improper
• Be sure that all the mounting screws, terminal screws, and cable connec-
• Leave the label attached to the Unit when wiring. Removing the label may
• Remove the label after the completion of wiring to ensure proper heat dis-
• Use crimp terminals for wiring. Do not connect bare stranded wires
protect against electrical shock.
or the computer before attempting any of the following. Performing any of
the following with the power supply turned ON may lead to electrical
shock:
An incorrect voltage may result in malfunction or burning.
rated voltage and frequency is supplied. Be particularly careful in places
where the power supply is unstable. An incorrect power supply may result
in malfunction.
cuiting in external wiring. Insufficient safety measures against short-cir-
cuiting may result in burning.
nal (GR) on the Power Supply Unit before performing withstand voltage
tests or insulation resistance tests. Not doing so may result in burning.
do so may result in malfunction, fire, or electric shock.
installation of the Units may result in malfunction.
tor screws are tightened to the torque specified in the relevant manuals.
Incorrect tightening torque may result in malfunction.
result in malfunction if foreign matter enters the Unit.
sipation. Leaving the label attached may result in malfunction.
directly to terminals. Connection of bare stranded wires may result in
burning.
• Installing or removing the Controller Link Unit.
• Assembling the Units.
• Setting DIP or rotary switches.
• Connecting or disconnecting any cables or wiring.
• Connecting or disconnecting any terminal block.
5