MPC564MZP56 Freescale Semiconductor, MPC564MZP56 Datasheet - Page 282

• Manufacturer Part Number: MPC564MZP56
• Description: IC MCU 512K FLASH 56MHZ 388-BGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC564MZP56

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 56MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 56
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 388-BGA
• Core: PowerPC
• Processor Series: MPC5xx
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 56 MHz
• Data Ram Size: 32 KB
• On-chip Adc: Yes
• Number Of Programmable I/os: 56
• Number Of Timers: 2
• Operating Supply Voltage: 0 V to 5 V
• Mounting Style: SMD/SMT
• A/d Bit Size: 10 bit
• A/d Channels Available: 32
• Height: 1.95 mm
• Interface Type: CAN, JTAG, QSPI, SCI, SPI, UART
• Length: 27 mm
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 2.7 V, 5.25 V
• Supply Voltage (min): 2.5 V, 4.75 V
• Width: 27 mm
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No RoHS Version Available

System Configuration and Protection
6.2.2.4.4
The TBSCR is 16-bit read/write register. It controls the TB, decrementer count enable, and interrupt
generation and is used for reporting the source of the interrupts. The register can be read anytime. A status
bit is cleared by writing a one to it. (Writing a zero has no effect.) More than one bit can be cleared at a time.
6.2.2.4.5
The RTCSC enables the different RTC functions and reports the source of the interrupts. The register can
be read anytime. A status bit is cleared by writing a one to it. (Writing a zero does not affect a status bit’s
value.) More than one status bit can be cleared at a time. This register is locked after reset by default.
Unlocking is accomplished by writing 0x55CC AA33 to its associated key register. See
“Keep-Alive Power Registers Lock
6-42
10:11
Bits
PORESET
0:7
12
13
14
15
8
9
Field
Addr
REFBE
REFAE
TBIRQ
Name
REFB
REFA
TBF
TBE
Time Base Control and Status Register (TBSCR)
Real-Time Clock Status and Control Register (RTCSC)
—
MSB
0
1
Time base interrupt request. These bits determine the interrupt priority level of the time base.
Refer to
Reference A (TBREF0) interrupt status.
0 No match detected
1 TBREF0 value matches value in TBL
Reference B (TBREF1) interrupt status.
0 No match detected
1 TBREF1 value matches value in TBL
Reserved
Reference A (TBREF0) interrupt enable. If this bit is set, the time base generates an interrupt
when the REFA bit is set.
Reference B (TBREF1) interrupt enable. If this bit is set, the time base generates an interrupt
when the REFB bit is set.
Time base freeze. If this bit is set, the time base and decrementer stop while FREEZE is
asserted.
Time base enable
0 Time base and decrementer are disabled
1 Time base and decrementer are enabled
Figure 6-34. Time Base Control and Status Register (TBSCR)
2
Section 6.1.4, “Enhanced Interrupt
TBIRQ
3
MPC561/MPC563 Reference Manual, Rev. 1.2
4
Table 6-18. TBSCR Bit Descriptions
Mechanism.”
5
6
7
0000_0000_0000_0000
REFA REFB
8
0x2F C200
Description
Controller” for interrupt level encoding.
9
10
—
11
REFAE REFBE TBF
12
Freescale Semiconductor
13
Section 8.8.3.2,
14
TBE
LSB
15