Z84C0010PEG Zilog, Z84C0010PEG Datasheet - Page 30

• Manufacturer Part Number: Z84C0010PEG
• Description: IC 10MHZ Z80 CMOS CPU 40-DIP
• Manufacturer: Zilog
• Series: Z80r

Specifications of Z84C0010PEG

• Processor Type: Z80
• Features: Enhanced Z80 Microprocessor/CPU
• Speed: 10MHz
• Voltage: 5V
• Mounting Type: Through Hole
• Package / Case: 40-DIP (0.620", 15.75mm)
• Core Size: 8bit
• Cpu Speed: 10MHz
• Digital Ic Case Style: DIP
• No. Of Pins: 40
• Operating Temperature Range: -40°C To +100°C
• Svhc: No SVHC (18-Jun-2010)
• Operating Temperature Max: 100°C
• Rohs Compliant: Yes
• Processor Series: Z84C0xx
• Core: Z80
• Data Bus Width: 8 bit
• Program Memory Size: 64 KB
• Maximum Clock Frequency: 10 MHz
• Operating Supply Voltage: 0 V to 5 V
• Maximum Operating Temperature: + 100 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• Base Number: 84
• Clock Frequency: 10MHz
• Frequency Typ: 10MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 269-3898; Z84C0010PEG

10
UM008005-0205
Z80 CPU
User’s Manual
interrupt status to Mode 0. During reset time, the address and data bus go to
a high-impedance state, and all control output signals go to the inactive
state. Notice that RESET must be active for a minimum of three full clock
cycles before the reset operation is complete.
RFSH
Refresh (output, active Low). RFSH, together with MREQ indicates that
the lower seven bits of the system’s address bus can be used as a refresh
address to the system’s dynamic memories.
WAIT
WAIT (input, active Low). WAIT communicates to the CPU that the
addressed memory or I/O devices are not ready for a data transfer. The CPU
continues to enter a WAIT state as long as this signal is active. Extended
WAIT periods can prevent the CPU from properly refreshing dynamic
memory.
WR
Write (output, active Low, tristate). WR indicates that the CPU data bus
holds valid data to be stored at the addressed memory or I/O location.
CLK
Clock (input). Single-phase MOS-level clock.
Overview