F39-EU1E Omron, F39-EU1E Datasheet - Page 418

• Manufacturer Part Number: F39-EU1E
• Description: F3S-B OPTIONAL PROGRAMMING KIT
• Manufacturer: Omron

Specifications of F39-EU1E

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Light Curtain Type: Safety
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com
Specifications
Ratings
Coil
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23 C with tolerances of 15%.
Contacts
Characteristics of Sockets
Note: Use the P7SA-1@F-ND in the ambient temperature range of 20 to 70 C.
*1. When operating the P7SA-1@F at a temperature between 55 and 85°C, reduce the continuous current (6 A at 55 C or less) by 0.1 A for each
*2. Measurement conditions: Measurement of the same points as for the dielectric strength at 500 VDC.
Characteristics
Note: The above values are initial values.
*1. The contact resistance was measured with 1 A at 5 VDC using the voltage-drop method.
*2. These times were measured at the rated voltage and an ambient temperature of 23 C. Contact bounce time is not included.
*3. The response time is the time it takes for the normally open contacts to open after the coil voltage is turned OFF. Contact bounce time is
*4. The insulation resistance was measured with a 500-VDC megohmmeter at the same locations as the dielectric strength was measured.
*5. Pole 3 refers to terminals 31 32 or 33 34, pole 4 refers to terminals 43 44, pole 5 refers to terminals 53 54, and pole 6 refers to terminals
*6. When using a P7SA Socket, the dielectric strength between coil contacts/different poles is 2,500 VAC, 50/60 Hz for 1 min.
*7. The durability is for an ambient temperature of 15 to 35 C and an ambient humidity of 25% to 75%.
*8. The failure rate is based on an operating frequency of 300 operations/min.
*9. When operating at a temperature between 70 and 85 C, reduce the rated carry current (6 A at 70 C or less) by 0.1 A for each degree above 70 C.
Rated voltage
Item
Rated load
Rated carry current
Max. switching voltage
Max. switching current
Contact resistance *1
Operating time *2
Response time *3
Release time *2
Maximum operating
frequency
Insulation resistance *4
Dielectric strength *5 *6
Vibration resistance
Shock resistance
Durability *7
Failure rate (P level)
(reference value *8)
Ambient operating temperature *9
Ambient operating humidity
Weight
degree above 55 C.
When operating the P7SA-1@F-ND at a temperature between 50 and 70 C, reduce the continuous current (6 A at 50 C or less) by 0.3 A for
each degree above 50 C.
included. Measurement conditions: Rated voltage operation, Ambient temperature: 23 C
63 64.
P7SA-1@
2. Performance characteristics are based on a coil temperature of 23 C.
3. The maximum voltage is based on an ambient operating temperature of 23 C maximum.
Use the P7SA-1@F and P7SA-1@F-ND in the ambient humidity range of 45 to 85%.
Model
24 VDC
http://www.ia.omron.com/
Mechanical
Rated load
Destruction
Malfunction
Mechanical
Electrical
Item
Continuous current
Rated current
4 poles: 15
6 poles: 20.8
6 A *1
(mA)
100 m max.
20 ms max.
10 ms max.
20 ms max.
36,000 operations/h
1,800 operations/h
1,000 M min.
Between coil contacts/different poles (except for poles 3 4 in 4-pole Relays and poles 3 5, 4 6, and 5 6
in 6-pole Relays): 4,000 VAC, 50/60 Hz for 1 min.
Between different poles (poles 3 4 in 4-pole Relays and poles 3 5, 4 6, and 5 6 in 6-pole Relays):
2,500 VAC, 50/60 Hz for 1 min.
Between contacts of same polarity: 1,500 VAC, 50/60 Hz for 1 min.
10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
1,000 m/s
100 m/s
10,000,000 operations min. (at approx. 36,000 operations/h)
100,000 operations min. (at the rated load and approx. 1,800 operations/h)
5 VDC, 1 mA
5% to 85%
4 poles: Approx. 22 g
6 poles: Approx. 25 g
40 to 85 C (with no icing or condensation)
Load
2
2
Coil resistance
4 poles: 1,600
6 poles: 1,152
6 A at 250 VAC, 6 A at 30 VDC
( )
2,500 VAC for 1 min. between poles
250 VAC, 125 VDC
Resistive load
Dielectric strength
6 A
6 A
Must operate
voltage (V)
75% max.
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
Must release
voltage (V)
10% min.
voltage (V)
110%
Max.
Insulation resistance
1,000 M min. *2
Power consumption
4 poles: Approx. 360
6 poles: Approx. 500
(mW)
G7SA
2