F39-EU1E Omron, F39-EU1E Datasheet - Page 358

• Manufacturer Part Number: F39-EU1E
• Description: F3S-B OPTIONAL PROGRAMMING KIT
• Manufacturer: Omron

Specifications of F39-EU1E

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Light Curtain Type: Safety
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com
Recommended Connectors
Use connectors with screws not exceeding 9 mm, otherwise the
screws will protrude into the case interior, interfering with other
components in the case.
The connectors listed in the following table have connectors with
thread sections not exceeding 9 mm.
Use the recommended connectors to ensure conformance to IP67.
Use LAPP connectors together with seal packing (JPK-16, GP-13.5,
or GPM20), and tighten to the specified tightening torque. Seal
packing is sold separately.
Others
G1/2
Pg13.5
M20
1/2-14NPT
LAPP is a German manufacturer.
Before using a 2-conduit 1/2-14NPT type, attach the provided
changing adaptor to the Switch and then connect the
recommended connector.
When attaching a cover, be sure that the seal rubber is in place and
that there is no foreign material present. If the cover is attached
with the seal rubber out of place or if foreign material is stuck to the
rubber, a proper seal will not be obtained.
Do not use any screws to connect the cover other than the
specified ones. The seal characteristics may be reduced.
Make sure that foreign particles do not enter the head when
removing the screws from the four corners to change the head
position in any of the four directions.
Use the following recommended countermeasures to prevent
telegraphing when using adjustable or long levers.
1. Make the rear edge of the dog smooth with an angle of 15 to
2. Design the circuit so that no error signal will be generated.
Size
30 or make it in the shape of a quadratic curve.
LAPP
LAPP
LAPP
LAPP
Manufacturer
http://www.ia.omron.com/
ST-PF1/2
5380-1002
ST-13.5
5301-5030
ST-M20
5311-1020
ST-NPT1/2
5301-6030
Model
1.5
6.0 to 12.0 mm
6.0 to 12.0 mm
7.0 to 13.0 mm
6.0 to 12.0 mm
Applicable cable
diameter
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
D4N
20