M306N4FGTFP#U0 Renesas Electronics America, M306N4FGTFP#U0 Datasheet - Page 260

• Manufacturer Part Number: M306N4FGTFP#U0
• Description: MCU 5V 256K T-TEMP PB-FREE 100-Q
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/6Nr

Specifications of M306N4FGTFP#U0

• Core Processor: M16C/60
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: CAN, I²C, IEBus, SIO, UART/USART
• Peripherals: DMA, WDT
• Number Of I /o: 85
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 10K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 26x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-QFP
• For Use With: R0K3306NKS001BE - KIT DEV RSK RSK-M16C/6NKR0K3306NKS000BE - KIT DEV RSK RSK-M16C/6NK
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

M16C/6N Group (M16C/6N4)
Rev.2.40
REJ09B0009-0240
Figure 19.21 Timing of Transmit Sequence
19.15.2 Transmission
Figure 19.21 shows the Timing of Transmit Sequence.
(1) If the TrmReq bit in the CiMCTLj register (i = 0, 1, j = 0 to 15) is set to 1 (transmission slot) in the bus
(2) If the arbitration is lost after the CAN module starts the transmission, bits TrmActive and TrmState are
(3) If the transmission has been successful without lost in arbitration, the SentData bit in the CiMCTLj
(4) When starting the next transmission, set bits SentData and TrmReq to 0. And set the TrmReq bit to 1
idle state, the TrmActive bit in the CiMCTLj register and the TrmState bit in the CiSTR register are set
to 1 (transmitting/transmitter), and CAN module starts the transmission.
set to 0.
register is set to 1 (transmission is successfully completed) and TrmActive bit is set to 0 (waiting for
bus idle or completion of arbitration). And when the interrupt enable bits in the CiICR register = 1
(interrupt enabled), CANi successful transmission interrupt request is generated and the MBOX (the
slot number which transmitted the message) and TrmSucc bit in the CiSTR register are changed.
after checking that bits SentData and TrmReq are set to 0.
Apr 14, 2006
transmission interrupt
i = 0, 1
j = 0 to 15
CANi successful
TrmActive bit
SentData bit
TrmState bit
TrmSucc bit
TrmReq bit
MBOX bit
page 236 of 376
CTX
(1)
(1)
(1)
SOF
(2)
(2)
ACK
EOF
(3)
(3)
(3)
IFS
Transmission slot No.
SOF
(4)
19. CAN Module