M306N4FGTFP#U0 Renesas Electronics America, M306N4FGTFP#U0 Datasheet - Page 256

• Manufacturer Part Number: M306N4FGTFP#U0
• Description: MCU 5V 256K T-TEMP PB-FREE 100-Q
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/6Nr

Specifications of M306N4FGTFP#U0

• Core Processor: M16C/60
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: CAN, I²C, IEBus, SIO, UART/USART
• Peripherals: DMA, WDT
• Number Of I /o: 85
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 10K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 26x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-QFP
• For Use With: R0K3306NKS001BE - KIT DEV RSK RSK-M16C/6NKR0K3306NKS000BE - KIT DEV RSK RSK-M16C/6NK
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

M16C/6N Group (M16C/6N4)
Rev.2.40
REJ09B0009-0240
19.11 Basic CAN Mode
Figure 19.19 Slots 14 and 15 Operation in Basic CAN Mode
When the BasicCAN bit in the CiCTLR register (i = 0, 1) is set to 1 (Basic CAN mode enabled), slots 14 and
15 correspond to Basic CAN mode. In normal operation mode, each slot can handle only one type message
at a time, either a data frame or a remote frame by setting CiMCTLj regisrer (j = 0 to 15). However, in Basic
CAN mode, slots 14 and 15 can receive both types of message at the same time.
When slots 14 and 15 are defined as reception slots in Basic CAN mode, received messages are stored in
slots 14 and 15 alternately.
Which type of message has been received can be checked by the RemActive bit in the CiMCTLj register.
Figure 19.19 shows the Slots 14 and 15 Operation in Basic CAN Mode.
When using Basic CAN mode, note the following points.
(1) Setting of Basic CAN mode has to be done in CAN reset/initialization mode.
(2) Select the same ID for slots 14 and 15. Also, setting of registers CiLMAR and CiLMBR has to be the
(3) Define slots 14 and 15 as reception slot only.
(4) There is no protection available against message overwrite. A message can be overwritten by a new
(5) Slots 0 to 13 can be used in the same way as in normal CAN operation mode.
same.
message.
Apr 14, 2006
Slot 14
Slot 15
page 232 of 376
Locked (empty)
Msg n
Empty
Locked (empty)
Msg n
Msg n+1
Locked
Msg n + 1
(Msg n)
Msg n+2
Msg n+2 (Msg n lost)
Locked (Msg n+1)
19. CAN Module