MC908LD64IFUE Freescale Semiconductor, MC908LD64IFUE Datasheet - Page 198

• Manufacturer Part Number: MC908LD64IFUE
• Description: IC MCU 8BIT FOR LCD 64-QFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC908LD64IFUE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 6MHz
• Connectivity: I²C, USB
• Peripherals: OSD, POR, PWM
• Number Of I /o: 39
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 6x8b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 64-QFP
• Processor Series: HC08LD
• Core: HC08
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: I2C, USB
• Maximum Clock Frequency: 6 MHz
• Number Of Programmable I/os: 39
• Number Of Timers: 2
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: FSICEBASE, M68CBL05CE
• Minimum Operating Temperature: 0 C
• On-chip Adc: 8 bit, 6 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Universal Serial Bus Module (USB)
14.6.3 USB SIE Timing Interrupt Register (SIETIR)
Data Sheet
198
Address:
SOFF — Start Of Frame Detect Flag
EOF2F — Second End Of Frame Point Flag
EOPF — End of Packet Detect Flag
Reset:
Read:
Write:
This read-only bit is set when a valid SOF PID is detected on the D0+
and D0– lines at the root port. Software must clear this flag by writing
a logic 1 to SOFFR bit in the SIETSR register. Reset clears this bit.
Writing to SOFF has no effect.
This read-only bit is set when the internal frame timer counts to the bit
time that the hub must see upstream traffic terminated near the end
of frame. This bit time is defined as 10 bit times from the next Start Of
Frame PID. Software must clear this flag by writing a logic 1 to
EOF2FR bit in the SIETSR register. Reset clears this bit. Writing to
EOF2F has no effect.
This read-only bit is set when a valid End Of Packet sequence is
detected on the D0+ and D0– lines. Software must clear this flag by
writing a logic 1 to the EOPFR bit in the SIETSR register. Reset clears
this bit. Writing to EOPF has no effect.
Figure 14-5. USB SIE Timing Interrupt Register (SIETIR)
1 = Start Of Frame PID has been detected
0 = Start Of Frame PID has not been detected
1 = Frame timer counts to the EOF2 point
0 = Frame timer does not count to the EOF2 point
1 = End-of-Packet sequence has been detected
0 = End-of-Packet sequence has not been detected
$0056
SOFF
Bit 7
Universal Serial Bus Module (USB)
0
= Unimplemented
EOF2F
6
0
EOPF
5
0
TRANF
4
0
SOFIE
3
0
MC68HC908LD64
EOF2IE
Freescale Semiconductor
2
0
EOPIE
1
0
—
TRANIE
Rev. 3.0
Bit 0
0