r4f2426 Renesas Electronics Corporation., r4f2426 Datasheet - Page 457

• Manufacturer Part Number: r4f2426
• Description: 16-bit Single-chip Microcomputer H8s Family / H8s/2400 Series
• Manufacturer: Renesas Electronics Corporation.

(2)
Figure 8.16 shows an example of transfer when ETEND output is enabled, and word-size, normal
transfer mode (burst mode) is performed from external 16-bit, 2-state access space to external 16-
bit, 2-state access space.
In burst mode, one-byte or one-word transfers are executed continuously until transfer ends.
Once burst transfer starts, requests from other channels, even of higher priority, are held pending
until transfer ends.
If an NMI interrupt is generated while a channel designated for burst transfer is enabled for
transfer, the EDA bit is cleared and transfer is disabled. If a block transfer has already been
initiated within the EXDMAC, the bus is released on completion of the currently executing byte or
word transfer, and burst transfer is aborted. If the last transfer cycle in burst transfer has been
initiated within the EXDMAC, transfer is executed to the end even if the EDA bit is cleared.
φ
Address bus
RD
HWR
LWR
ETEND
Normal Transfer Mode (Burst Mode)
Figure 8.16 Example of Normal Transfer Mode (Burst Mode) Transfer
Bus
release
DMA read
DMA write DMA read DMA write DMA read DMA write
Burst transfer
Rev. 1.00 Sep. 19, 2008 Page 429 of 1270
Section 8 EXDMA Controller (EXDMAC)
Last transfer cycle
REJ09B0466-0100
Bus
release