TMP86xy48UG/FG Toshiba, TMP86xy48UG/FG Datasheet - Page 5

• Manufacturer Part Number: TMP86xy48UG/FG
• Manufacturer: Toshiba

Specifications of TMP86xy48UG/FG

• Package: LQFP64/QFP64
• Rom Types (m=mask,p=otp,f=flash): F/E
• Rom Size: 32
• Ram Size: 2K
• Driver Led: 11
• Driver Lcd: -
• Spi/sio Channels: 1
• Uart/sio Channels: 1
• I2c/sio Channels: 1
• High-speed Serial Output: 2
• Adc 8-bit Channels: -
• Adc 10-bit Channels: 16
• Da Converter Channels: -
• Timer Counter 18-bit Channel: -
• Timer Counter 16-bit Channel: 2
• Timer Counter 8-bit Channel: 2
• Motor Channels: -
• Watchdog Timer: Y
• Dual Clock: Y
• Clock Gear: -
• Number Of I/o Ports: 54
• Power Supply (v): 2.7 to 3.6

Features
• The information contained herein is subject to change without notice. 021023_D
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general
• The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal
• The products described in this document shall not be used or embedded to any downstream products of which manufacture, use
• The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
• The products described in this document are subject to foreign exchange and foreign trade control laws. 060925_E
• For a discussion of how the reliability of microcontrollers can be predicted, please refer to Section 1.3 of the chapter entitled Quality
can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the
buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and
to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or
damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the
most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling
Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. 021023_A
equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are
neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or
failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy
control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control
instruments, medical instruments, all types of safety devices, etc. Unintended Usage of TOSHIBA products listed in this document
shall be made at the customer's own risk. 021023_B
and/or sale are prohibited under any applicable laws and regulations. 060106_Q
TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by
implication or otherwise under any patents or other rights of TOSHIBA or the third parties. 070122_C
and Reliability Assurance/Handling Precautions. 030619_S
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
microcomputer, including FLASH, RAM, multi-function timer/counter, serial interface (UART,
SIO, I
8-bit single chip microcomputer TLCS-870/C series
Instruction execution time: 0.25 µs (at 16 MHz)
132 types and 731 basic instructions
20 interrupt sources (External: 5, Internal: 15)
Input/output ports (54 pins)
16-bit timer counter: 2 ch
8-bit timer counter: 2 ch
Time base timer
Divider output function
Watchdog timer
• Timer, Event counter,
• Timer, Event counter, PWM output,
• Interrupt source/internal reset generate (Programmable)
TMP86FM48UG
TMP86FM48FG
Product No.
The TMP86FM48 is the high-speed, high-performance and low power consumption 8-bit
Pulse width measurement, External trigger timer,
Window, PPG output modes
Programmable divider output, Capture modes
2
C), a 10-bit AD converter and two clock generators on chip.
(Program area)
32256 × 8 bits
FLASH
122 µs (at 32.768 kHz)
CMOS 8-Bit Microcontroller
512 × 8 bits
(Data area)
FLASH
TMP86FM48UG/FG
86FM48-1
2.0 K × 8 bits
RAM
LQFP64-P-1010-0.50E
QFP64-P-1414-0.80C
Package
LQFP64-P-1010-0.50E
QFP64-P-1414-0.80C
Emulation Chip
TMP86C948XB
TMP86FM48UG
TMP86FM48FG
TMP86FM48
2007-08-24