TMP86xy48UG/FG Toshiba, TMP86xy48UG/FG Datasheet - Page 187

• Manufacturer Part Number: TMP86xy48UG/FG
• Manufacturer: Toshiba

Specifications of TMP86xy48UG/FG

• Package: LQFP64/QFP64
• Rom Types (m=mask,p=otp,f=flash): F/E
• Rom Size: 32
• Ram Size: 2K
• Driver Led: 11
• Driver Lcd: -
• Spi/sio Channels: 1
• Uart/sio Channels: 1
• I2c/sio Channels: 1
• High-speed Serial Output: 2
• Adc 8-bit Channels: -
• Adc 10-bit Channels: 16
• Da Converter Channels: -
• Timer Counter 18-bit Channel: -
• Timer Counter 16-bit Channel: 2
• Timer Counter 8-bit Channel: 2
• Motor Channels: -
• Watchdog Timer: Y
• Dual Clock: Y
• Clock Gear: -
• Number Of I/o Ports: 54
• Power Supply (v): 2.7 to 3.6

BOOT
ROM
2.19.6.4 Product Discrimination Code Output Mode (Operation Command: C0H)
Number of Bytes
1st byte
2nd byte
3rd byte
4th byte
5th byte
6th byte
7th byte
8th byte
9th byte
10th byte
11th byte
12th byte
13th byte
14th byte
15th byte
16th byte
17th byte
18th byte
19th byte
20th byte
Transferred
Description of product discrimination code output mode
1.
2.
3.
4.
5.
Table 2.19.9 shows product discrimination code output mode process.
Note: “xxH × 3” denotes that operation stops after sending 3 bytes of xxH. For details,
The process of the 1st byte through the 4th byte are the same as FLASH memory
writing mode.
command data (C0H).
When the 5th byte is one of the operation command data shown in Table 2.19.5,
the device sends the echo back data which is the same as received operation
command data (in this case, C0H). If the 5th byte data does not correspond to the
operation command data, the device stops UART function after sending 3 bytes of
operation command error code: (63H).
to 2.19.12 “Product Discrimination Code”.
After sending the SUM, the device waits for the next operation command data.
The receive data in the 5th byte is the product discrimination code output
The 7th and the 19th bytes are the product discrimination code. For details, refer
Table 2.19.9 Product Discrimination Code Output Process
Matching data (5AH)
−
Baud rate modification data
(See Table 2.19.3)
−
Operation
(C0H)
−
(Wait for the next operation)
(Command data)
Transfer Data from External
Controller to TMP86FM48
refer to “2.19.8 Error Code”.
command
86FM48-183
data
9600 bps
9600 bps
9600 bps
9600 bps
Changed new baud rate
Changed new baud rate
Changed new baud rate
Changed new baud rate
Changed new baud rate
Changed new baud rate
Changed new baud rate
Changed new baud rate
Changed new baud rate
Changed new baud rate
Changed new baud rate
Changed new baud rate
Changed new baud rate
Changed new baud rate
Changed new baud rate
Changed new baud rate
Baud Rate
Transfer Data from TMP86FM48 to
− (Baud rate auto set)
OK: Echo back data (5AH)
Error: Nothing transmitted
−
OK: Echo back data
Error: A1H × 3, A3H × 3, 62H × 3
(Note 1)
−
OK: Echo back data (C0H)
Error: A1H × 3, A3H × 3, 63H × 3
(Note 1)
3AH
0AH
02H
00H
00H
00H
00H
01H
80H
00H
FFH
FFH
7FH
−
External Controller
Start mark
The number of transfer data
(from 9th to 18th byte)
Length of address (2 bytes)
Reserved data
Reserved data
Reserved data
Reserved data
The number of ROM block
(1 block)
First address of ROM
End address of ROM
Checksum of transferred
data (from 9th to 18th byte)
TMP86FM48
2007-08-24