RCLXT16706FE Intel, RCLXT16706FE Datasheet - Page 298

• Manufacturer Part Number: RCLXT16706FE
• Manufacturer: Intel

Specifications of RCLXT16706FE

• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (min): 2.97V
• Operating Supply Voltage (max): 3.63V
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Lead Free Status / Rohs Status: Not Compliant

Intel IXF6048 — 51/155/622/2488 Mbit/s SONET/SDH Cell/Packet Interface
298
Bit
9:8
7:6
12
11
10
XmtPOHSrc
Unused
XmtH4Cnfg
XmtF2Src
XmtF3Src
Name
This bit forces all POH bytes and fixed stuff columns to be pass-
through. It is ignored in regenerator configuration—the received
POH bytes are passed through.
'0' = Source of all POH bytes are independently specified by other
bits in this register. (SDH)
'1' = All POH bytes are passed through (testing only).
Sets transmit value of H4 byte. It is ignored in regenerator
configuration—the received POH bytes are passed through.
'0' = All '0' (H4 transmit value is 00H). (SDH)
'1' = All '1' (H4 transmit value is FFH).
These bits specify the source of the transmitted F2 byte when
TPOHINS input pin is disabled (TPOHINS_Ena = ‘0’ in register
T_HPT_C[15]) or active-low on F2 time slot in TPOH serial bus
input AND XmtPohSrc bit is set to '0'. It is ignored in regenerator
configuration—the received F2 byte is passed through.
'00' = Dedicated 64-Kbit/s TPOW1 serial input, when used.
'01' = Unused. Internal Overhead default value (all '0's).
'1X' = Source is received byte from downstream (testing only).
These bits specify the source of the transmitted Z3/F3 byte when
TPOHINS input pin is disabled (TPOHINS_Ena = ‘0’ in register
T_HPT_C[15]) or active-low on Z3/F3 time slot in TPOH serial bus
input AND XmtPohSrc bit is set to '0'. It is ignored in regenerator
configuration—the received Z3/F3 byte is passed through.
'00' = Dedicated 64-Kbit/s TPOW2 serial input, when used.
'01' = Unused. Internal Overhead default value (all '0's)
'1X' = Source is received byte from downstream (testing only).
Description
Type
R/W
R/W
R/W
R/W
Datasheet
Default
'01'
'01'
'0'
'0'