KIT_TC1797_SK Infineon Technologies, KIT_TC1797_SK Datasheet - Page 88

• Manufacturer Part Number: KIT_TC1797_SK
• Description: KIT STARTER AUDO FUTURE TC1797
• Manufacturer: Infineon Technologies
• Series: Audo Futurer
• Type: MCUr

Specifications of KIT_TC1797_SK

• Contents: Board, Adapters, Cables, CD, Power Supply
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: TC1797
• Other names: KITTC1797SKIN

value has no time to update and the stored value from the previous access is
used.
Workaround
This error condition is avoided by increasing the address phase length or by
adding another access phase (i.e. address hold, command delay or command
wait) between the address and burst phases of the access. This will give the
stored address values enough time to update.
FIRM_TC.H000 Reading the Flash Microcode Version
The 1-byte Flash microcode version number is stored at the bit locations 103-
96 of the LDRAM address D000 000C
overwritten by user data at any time.
The version number is defined as “Vsn”, contained in the byte as:
•
•
Example: V21, V23, V3A, V3F, etc.
FlexRay_AI.H002 Timer 1 Precision
The relative timer is used to generate timing triggers based on the Macrotick
counter. If activated (set bit T1C.T1RC), the timer waits for the first Macrotick
increment signal to start its configured Macrotick counting. This leads to an
uncertainty of one Macrotick in single-shot mode and for the first period in
continuous mode.
For subsequent counting periods in continuous mode this kind of uncertainty
does not occur and the precision of the timer signal increases to a single bclk
cycle.
Workaround
None.
TC1797, EES-AC, ES-AC, AC
s = highest 4 bit, hex number
n = lowest 4 bit, hex number
88/101
H
after each reset, and subject to be
Application Hints
Rel. 1.3, 18.12.2009
Errata Sheet