EP1AGX20CF484C6N Altera, EP1AGX20CF484C6N Datasheet - Page 24

• Manufacturer Part Number: EP1AGX20CF484C6N
• Description: IC ARRIA GX FPGA 20K 484FBGA
• Manufacturer: Altera
• Series: Arria GXr

Specifications of EP1AGX20CF484C6N

• Number Of Logic Elements/cells: 21580
• Number Of Labs/clbs: 1079
• Total Ram Bits: 1229184
• Number Of I /o: 230
• Voltage - Supply: 1.15 V ~ 1.25 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 484-FBGA
• Family Name: Arria™ GX
• Number Of Logic Blocks/elements: 21580
• # I/os (max): 230
• Process Technology: CMOS
• Operating Supply Voltage (typ): 1.2V
• Logic Cells: 21580
• Ram Bits: 1229184
• Operating Supply Voltage (min): 1.15V
• Operating Supply Voltage (max): 1.25V
• Operating Temp Range: 0C to 85C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 484
• Package Type: FC-FBGA
• No. Of Macrocells: 21580
• Family Type: Arria GX
• No. Of I/o's: 230
• Operating Frequency Max: 622.08MHz
• Operating Temperature Range: 0°C To +85°C
• Logic Case Style: BGA
• No. Of Pins: 484
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Compliant
• Other names: 544-2395

2–18
Arria GX Device Handbook, Volume 1
1
XAUI Mode
In XAUI mode, the rate matcher adheres to clause 48 of the IEEE 802.3ae specification
for clock rate compensation. The rate matcher performs clock compensation on
columns of /R/ (/K28.0/), denoted by //R//. An //R// is added or deleted
automatically based on the number of words in the FIFO buffer.
PCI Express (PIPE) Mode Rate Matcher
In PCI Express (PIPE) mode, the rate matcher can compensate up to ± 300 PPM
(600 PPM total) frequency difference between the upstream transmitter and the
receiver. The rate matcher logic looks for skip ordered sets (SOS), which contains a
/K28.5/ comma followed by three /K28.0/ skip characters. The rate matcher logic
deletes or inserts /K28.0/ skip characters as necessary from/to the rate matcher FIFO.
The rate matcher in PCI Express (PIPE) mode has a FIFO buffer overflow and
underflow protection. In the event of a FIFO buffer overflow, the rate matcher deletes
any data after detecting the overflow condition to prevent FIFO pointer corruption
until the rate matcher is not full. In an underflow condition, the rate matcher inserts
9'h1FE (/K30.7/) until the FIFO buffer is not empty. These measures ensure that the
FIFO buffer can gracefully exit the overflow and underflow condition without
requiring a FIFO reset. The rate matcher FIFO overflow and underflow condition is
indicated on the pipestatus port.
You can bypass the rate matcher in PCI Express (PIPE) mode if you have a
synchronous system where the upstream transmitter and local receiver derive their
reference clocks from the same source.
GIGE Mode Rate Matcher
In GIGE mode, the rate matcher can compensate up to ± 100 PPM (200 PPM total)
frequency difference between the upstream transmitter and the receiver. The rate
matcher logic inserts or deletes /I2/ idle ordered sets to/from the rate matcher FIFO
during the inter-frame or inter-packet gap (IFG or IPG). /I2/ is selected as the rate
matching ordered set because it maintains the running disparity, unlike /I1/ that
alters the running disparity. Because the /I2/ ordered-set contains two 10-bit code
groups (/K28.5/, /D16.2/), 20 bits are inserted or deleted at a time for rate matching.
The rate matcher logic has the capability to insert or delete /C1/ or /C2/
configuration ordered sets when ‘GIGE Enhanced’ mode is chosen as the sub-protocol
in the MegaWizard Plug-In Manager.
If the frequency PPM difference between the upstream transmitter and the local
receiver is high, or if the packet size is too large, the rate matcher FIFO buffer can face
an overflow or underflow situation.
Basic Mode
In basic mode, you can program the skip and control pattern for rate matching. There
is no restriction on the deletion of a skip character in a cluster. The rate matcher
deletes the skip characters as long as they are available. For insertion, the rate matcher
inserts skip characters such that the number of skip characters at the output of rate
matcher does not exceed five.
© December 2009 Altera Corporation
Chapter 2: Arria GX Architecture
Transceivers