28125 Parallax Inc, 28125 Datasheet - Page 291

• Manufacturer Part Number: 28125
• Description: TEXT ROBOTICS
• Manufacturer: Parallax Inc

Specifications of 28125

• Title: Robotics with the Boe-Bot
• Product: Microcontroller Accessories
• Lead Free Status / RoHS Status: Not applicable / Not applicable

Chapter 8: Robot Control with Distance Detection · Page 277
ACTIVITY #2: BOE-BOT SHADOW VEHICLE
For one Boe-Bot to follow another, the Boe-Bot that follows, a.k.a. the shadow vehicle,
has to know how far ahead the lead vehicle is. If the shadow vehicle is lagging behind, it
has to detect this and speed up. If the shadow vehicle is too close to the lead vehicle, it
has to detect this as well and slow down. If it’s the right distance, it can wait until the
measurements indicate it’s too far or too close again.
Distance is just one kind of value that robots and other automated machinery are
responsible for. When a machine is designed to automatically maintain a value, such as
distance, pressure, or fluid level, it generally involves a control system. These systems
sometimes consist of sensors and valves, or sensors and motors, or, in the case of the
Boe-Bot, sensors and continuous rotation servos. There is also some kind of processor
that takes the sensor measurements and converts them to mechanical action.
The
processor has to be programmed to make decisions based on the sensor inputs, and then
control the mechanical outputs accordingly. In the case of the Boe-Bot, the processor is
the BASIC Stamp 2.
Closed loop control is a common method of maintaining levels, and it works very well
for helping the Boe-Bot maintain its distance from an object. There are lots of different
kinds of closed loop control. Some of the most common are hysteresis, proportional,
integral, and derivative control. All of these types of control are introduced in detail in
the Stamps in Class text Process Control, listed in the Preface.
Most control techniques can be implemented with just a few lines of code in PBASIC. In
fact, the majority of the proportional control loop shown in Figure 8-4 reduces to just one
line of PBASIC code. This diagram is called a block diagram, and it describes the steps
of the proportional control process that the Boe-Bot will use to measure distance with its
right IR LED and detector and adjust position to maintain distance with its right servo.