28125 Parallax Inc, 28125 Datasheet - Page 255

• Manufacturer Part Number: 28125
• Description: TEXT ROBOTICS
• Manufacturer: Parallax Inc

Specifications of 28125

• Title: Robotics with the Boe-Bot
• Product: Microcontroller Accessories
• Lead Free Status / RoHS Status: Not applicable / Not applicable

' {$PBASIC 2.5}
irDetectLeft
DO
LOOP
Your Turn
FREQOUT 8, 1, 38500
irDetectLeft = IN9
DEBUG HOME, "irDetectLeft = ", BIN1 irDetectLeft
PAUSE 100
√
√
√
√
√
√
Leave the Boe-Bot connected to the serial cable, because you will be using the
Debug Terminal to test your IR pair.
Place an object, such as your hand or a sheet of paper, about an inch from the left
IR pair, in the manner shown in Figure 7-1 on page 236.
Verify that when you place an object in front of the IR pair the Debug Terminal
displays a 0, and when you remove the object from in front of the IR pair, it
displays a 1.
If the Debug Terminal displays the expected values for object not detected (1)
and object detected (0), move on to the Your Turn section following the example
program.
If the Debug Terminal does not display the expected values, try the steps in the
Trouble-Shooting box.
Save TestLeftIrPair.bs2 as TestRightIrPair.bs2.
Trouble-Shooting
If the Debug Terminal does not display the expected values, check for circuit and program
entry errors.
If you are always getting 0, even when an object is not placed in front of the Boe-Bot, there
may be a nearby object that is reflecting the infrared. The surface of the table in front of the
Boe-Bot is a common culprit. Move the Boe-Bot so that the IR LED and detector cannot
possibly be reflecting off any nearby object.
If the reading is 1 most of the time when there is no object in front of the Boe-Bot, but
flickers to 0 occasionally, it may mean you have interference from a nearby fluorescent light.
Turn off any nearby fluorescent lights and repeat your tests.
VAR
Bit