PIC18F4431-E/P Microchip Technology, PIC18F4431-E/P Datasheet - Page 201

• Manufacturer Part Number: PIC18F4431-E/P
• Description: IC MCU FLASH 8KX16 40DIP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F4431-E/P

• Core Size: 8-Bit
• Program Memory Size: 16KB (8K x 16)
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, Power Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 36
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 40-DIP (0.600", 15.24mm)
• Controller Family/series: PIC18
• No. Of I/o's: 36
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 768Byte
• Cpu Speed: 40MHz
• No. Of Timers: 4
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 768 B
• Interface Type: EUSART, I2C, SPI, SSP
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 1 x 8
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DV164136
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 9 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DVA18XP400 - DEVICE ADAPTER 18F4220 PDIP 40LDACICE0206 - ADAPTER MPLABICE 40P 600 MIL
• Lead Free Status / Rohs Status: Details

REGISTER 18-8:
 2010 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
Note 1:
BRFEN
R/W-0
2:
Unimplemented in PIC18F2331/2431 devices; maintain these bits clear.
PWM<7:6> are implemented only on PIC18F4331/4431 devices. On PIC18F2331/2431 devices, setting or
clearing FLTCON has no effect.
BRFEN: Breakpoint Fault Enable bit
1 = Enable Fault condition on a breakpoint (i.e., only when PWMPIN = 1)
0 = Disable Fault condition
FLTBS: Fault B Status bit
1 = FLTB is asserted:
0 = No Fault
FLTBMOD: Fault B Mode bit
1 = Cycle-by-Cycle mode: Pins are inactive for the remainder of the current PWM period or until FLTB
0 = Inactive mode: Pins are deactivated (catastrophic failure) until FLTB is deasserted and FLTBS is
FLTBEN: Fault B Enable bit
1 = Enable Fault B
0 = Disable Fault B
FLTCON: Fault Configuration bit
1 = FLTA, FLTB or both deactivates all PWM outputs
0 = FLTA or FLTB deactivates PWM<5:0>
FLTAS: Fault A Status bit
1 = FLTA is asserted:
0 = No Fault
FLTAMOD: Fault A Mode bit
1 = Cycle-by-Cycle mode: Pins are inactive for the remainder of the current PWM period or until FLTA is
0 = Inactive mode: Pins are deactivated (catastrophic failure) until FLTA is deasserted and FLTAS is
FLTAEN: Fault A Enable bit
1 = Enable Fault A
0 = Disable Fault A
FLTBS
R/W-0
if FLTBMOD = 0, cleared by the user;
if FLTBMOD = 1, cleared automatically at beginning of the new period when FLTB is deasserted
is deasserted; FLTBS is cleared automatically when FLTB is inactive (no Fault present)
cleared by the user only
if FLTAMOD = 0, cleared by the user;
if FLTAMOD = 1, cleared automatically at beginning of the new period when FLTA is deasserted
deasserted; FLTAS is cleared automatically
cleared by the user only
FLTCONFIG: FAULT CONFIGURATION REGISTER
(1)
W = Writable bit
‘1’ = Bit is set
FLTBMOD
R/W-0
(1)
(1)
(1)
(1)
PIC18F2331/2431/4331/4431
FLTBEN
(2)
R/W-0
(1)
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
FLTCON
R/W-0
(2)
FLTAS
R/W-0
x = Bit is unknown
FLTAMOD
R/W-0
DS39616D-page 201
FLTAEN
R/W-0
bit 0