AT91SAM9M10-CU Atmel, AT91SAM9M10-CU Datasheet - Page 270

• Manufacturer Part Number: AT91SAM9M10-CU
• Description: IC MCU 16/32BIT ARM9 324TFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9M10-CU

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 400MHz
• Connectivity: EBI/EMI, Ethernet, I²C, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, DMA, LCD, POR, PWM, WDT
• Number Of I /o: 160
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: ROM
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 0.9 V ~ 1.1 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 324-TFBGA
• Processor Series: AT91SAMx
• Core: ARM926EJ-S
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: 2-Wire, SPI, USART
• Maximum Clock Frequency: 133 MHz
• Number Of Programmable I/os: 5
• Number Of Timers: 2 x 16 bit
• Operating Supply Voltage: 1.65 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM9M10-G45-EK
• Controller Family/series: AT91
• No. Of I/o's: 160
• Ram Memory Size: 64KB
• Cpu Speed: 400MHz
• No. Of Timers: 2
• Rohs Compliant: Yes
• Cpu Family: AT91
• Device Core: ARM926EJ-S
• Device Core Size: 32b
• Frequency (max): 400MHz
• Total Internal Ram Size: 64KB
• # I/os (max): 160
• Number Of Timers - General Purpose: 7
• Operating Supply Voltage (typ): 1.8/2.5/3.3V
• Operating Supply Voltage (max): 1.1/1.95/3.6V
• Operating Supply Voltage (min): 0.9/1.65/1.8/3V
• On-chip Adc: 8-chx10-bit
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 324
• Package Type: TFBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

• TCR: Temperature Compensated Self Refresh
Reset value is “0”.
This field is unique to Low-power SDRAM. It is used to program the refresh interval during self refresh mode, depending
on the case temperature of the low-power SDRAM.
The values of this field are dependent on Low-power SDRAM devices.
After the initialization sequence, as soon as TCR field is modified, Extended Mode Register is accessed automatically and
TCR bits are updated. In function of UPD_MR bit, update is done before entering in self refresh mode or during a refresh
command and a pending read or write access.
• DS: Drive Strength
Reset value is “0”.
This field is unique to Low-power SDRAM. It selects the driver strength of SDRAM output.
After the initialization sequence, as soon as DS field is modified, Extended Mode Register is accessed automatically and
DS bits are updated. In function of UPD_MR bit, update is done before entering in self refresh mode or during a refresh
command and a pending read or write access.
• TIMEOUT
Reset value is “00”.
This field defines when low-power mode is enabled.
• APDE: Active Power Down Exit Time
Reset value is “1”.
This mode is unique to DDR2-SDRAM devices. This mode allows to determine the active power-down mode, which
determines performance versus power saving.
0 = Fast Exit
1 = Slow Exit
After the initialization sequence, as soon as APDE field is modified Extended Mode Register, located in the memory of the
external device, is accessed automatically and APDE bits are updated. In function of the UPD_MR bit, update is done
before entering in self refresh mode or during a refresh command and a pending read or write access
• UPD_MR: Update Load Mode Register and Extended Mode Register
Reset value is “0”.
This bit is used to enable or disable automatic update of the Load Mode Register and Extended Mode Register. This
update is function of DDRSDRC integration in a system. DDRSDRC can either share or not share an external bus with
another controller.
6355B–ATARM–21-Jun-10
00
01
10
11
00
01
10
11
The SDRAM controller activates the SDRAM low-power mode immediately after the end of the last transfer.
The SDRAM controller activates the SDRAM low-power mode 64 clock cycles after the end of the last transfer.
The SDRAM controller activates the SDRAM low-power mode 128 clock cycles after the end of the last transfer.
Reserved
Update is disabled.
DDRSDRC shares external bus. Automatic update is done during an refresh command and a pending read or write access in SDRAM device.
DDRSDRC does not share external bus. Automatic update is done before entering in self refresh mode.
Reserved
AT91SAM9M10
270