Z16F6411FI20SG Zilog, Z16F6411FI20SG Datasheet - Page 82

• Manufacturer Part Number: Z16F6411FI20SG
• Description: IC ZNEO MCU FLASH 64K 80QFP
• Manufacturer: Zilog
• Series: Encore!® ZNEOr

Specifications of Z16F6411FI20SG

• Core Processor: ZNEO
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: EBI/EMI, I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 60
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 80-BQFP
• Processor Series: Z16F6x
• Core: Zneo
• Data Bus Width: 16 bit
• Data Ram Size: 4 B
• Interface Type: ESPI, I2C, UART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 60
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: Z16F2800100ZCOG
• Minimum Operating Temperature: 0 C
• On-chip Adc: 10 bit, 12 Channel
• For Use With: 770-1003 - ISP 4PORT FOR ZILOG ZNEO MCU269-4537 - DEV KIT FOR Z16F ZNEO
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 269-4571

Peripheral-Level Power Control
Power Control Option Bits
PS022008-0810
•
•
•
The ZNEO CPU is brought out of HALT mode by any of the following operations:
•
•
•
•
•
•
To minimize current in HALT mode, all GPIO pins which are configured as inputs must be
driven to one of the supply rails (V
On-chip peripherals in ZNEO Z16F Series parts automatically enter a low power mode
after Reset and whenever the peripheral is disabled. To minimize power consumption,
unused peripherals must be disabled. See the individual peripheral chapters for specific
register settings to enable or disable the peripheral.
User programmable option bits are available in some versions of the ZNEO Z16F Series
devices that enable very low power STOP mode operation. These options include disabling
the VBO protection circuits and disabling the WDT oscillator. For detailed description of
the user options that affect power management, see
WDT’s internal RC oscillator continues to operate.
If enabled, the WDT continues to operate.
All other on-chip peripherals continue to operate.
Interrupt or System Exception.
WDT time-out (System Exception or Reset).
Power-On reset.
VBO reset.
External RESET pin assertion.
Instantaneous HALT mode recovery.
P R E L I M I N A R Y
DD
or V
SS
).
Option Bits
on page 293.
Product Specification
ZNEO
Low-Power Modes
Z16F Series
67