Z16F6411FI20SG Zilog, Z16F6411FI20SG Datasheet - Page 278

• Manufacturer Part Number: Z16F6411FI20SG
• Description: IC ZNEO MCU FLASH 64K 80QFP
• Manufacturer: Zilog
• Series: Encore!® ZNEOr

Specifications of Z16F6411FI20SG

• Core Processor: ZNEO
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: EBI/EMI, I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 60
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 80-BQFP
• Processor Series: Z16F6x
• Core: Zneo
• Data Bus Width: 16 bit
• Data Ram Size: 4 B
• Interface Type: ESPI, I2C, UART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 60
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: Z16F2800100ZCOG
• Minimum Operating Temperature: 0 C
• On-chip Adc: 10 bit, 12 Channel
• For Use With: 770-1003 - ISP 4PORT FOR ZILOG ZNEO MCU269-4537 - DEV KIT FOR Z16F ZNEO
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 269-4571

PS022008-0810
Mass Erase
Flash Controller Bypass
Flash Controller Behavior using the On-Chip Debugger
The Flash memory cannot be Mass Erased by user code.
The Flash Controller is bypassed and the control signals for the Flash memory brought out
to the GPIO pins. Bypassing the Flash Controller allows faster Programming algorithms
by controlling the Flash programming signals directly.
Flash Controller Bypass is recommended for large volume gang programming 
applications, which do not require in-circuit programming of the Flash memory.
The following changes in behavior of the Flash Controller occur when the Flash
Controller is accessed using the On-Chip Debugger:
•
•
•
•
•
•
•
The Flash Controller does not have to be unlocked for program and erase operations.
The Flash Write Protect option bit is ignored.
The Flash Sector Protect register is ignored for programming and erase operations.
Programming operations are not limited to the page selected in the Flash Page Select
register.
Bits in the Flash Sector Protect register is written to one or zero.
The Flash Page Select register is written when the Flash Controller is unlocked.
The Mass Erase command is enabled.
P R E L I M I N A R Y
Product Specification
ZNEO
Flash Memory
Z16F Series
262