PIC18F67J10-I/PT Microchip Technology, PIC18F67J10-I/PT Datasheet - Page 58

• Manufacturer Part Number: PIC18F67J10-I/PT
• Description: IC PIC MCU FLASH 64KX16 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F67J10-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 128KB (64K x 16)
• Package / Case: 64-TFQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 50
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3936 B
• Interface Type: SPI/I2C/EUSART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 50
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164136, DM183032, DM183022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 11-ch x 10-bit
• A/d Bit Size: 10 bit
• A/d Channels Available: 11
• Height: 1 mm
• Length: 10 mm
• Supply Voltage (max): 2.7 V, 3.6 V
• Supply Voltage (min): 2 V, 2.7 V
• Width: 10 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA180015 - MODULE PLUG-IN 18F87J10 FOR HPCAC162062 - HEADER INTRFC MPLAB ICD2 64/80PAC164327 - MODULE SKT FOR 64TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC18F87J10
5.1.1
All PIC18 devices have a total of three hard-coded
return vectors in their program memory space. The
Reset vector address is the default value to which the
program counter returns on all device Resets; it is
located at 0000h.
PIC18 devices also have two interrupt vector
addresses for the handling of high priority and low
priority interrupts. The high priority interrupt vector is
located at 0008h and the low priority interrupt vector is
at 0018h. Their locations in relation to the program
memory map are shown in Figure 5-2.
FIGURE 5-2:
DS39663D-page 56
Legend:
High Priority Interrupt Vector
Low Priority Interrupt Vector
Flash Configuration Words
Program Memory
HARD MEMORY VECTORS
Reset Vector
(Top of Memory) represents upper boundary
of on-chip program memory space (see
Figure 5-1 for device-specific values).
Shaded area represents unimplemented
memory. Areas are not shown to scale.
On-Chip
Read ‘0’
HARD VECTOR AND
CONFIGURATION WORD
LOCATIONS FOR
PIC18F87J10 FAMILY
DEVICES
0000h
0008h
0018h
(Top of Memory-7)
(Top of Memory)
1FFFFFh
Preliminary
5.1.2
Because PIC18F87J10 family devices do not have per-
sistent configuration memory, the top four words of
on-chip program memory are reserved for configuration
information. On Reset, the configuration information is
copied into the Configuration registers.
The Configuration Words are stored in their program
memory location in numerical order, starting with the
lower byte of CONFIG1 at the lowest address and end-
ing with the upper byte of CONFIG4. For these devices,
only
CONFIG3, are used; CONFIG4 is reserved. The actual
addresses of the Flash Configuration Word for devices
in the PIC18F87J10 family are shown in Table 5-1.
Their location in the memory map is shown with the
other memory vectors in Figure 5-2.
Additional details on the device Configuration Words
are provided in Section 23.1 “Configuration Bits”.
TABLE 5-1:
PIC18F65J10
PIC18F85J10
PIC18F65J15
PIC18F85J15
PIC18F66J10
PIC18F86J10
PIC18F66J15
PIC18F86J15
PIC18F67J10
PIC18F87J10
Device
Configuration
FLASH CONFIGURATION WORDS
FLASH CONFIGURATION
WORD FOR PIC18F87J10
FAMILY DEVICES
Program
(Kbytes)
Memory
Words,
© 2006 Microchip Technology Inc.
128
32
48
64
96
CONFIG1
BFF8h to BFFFh
FFF8h to FFFFh
7FF8h to 7FFFh
Configuration
1FFF8h to to
17FF8h to to
Addresses
1FFFFh
17FFFh
Word
through