TMP86xy49UG/F/NG Toshiba, TMP86xy49UG/F/NG Datasheet - Page 187

• Manufacturer Part Number: TMP86xy49UG/F/NG
• Manufacturer: Toshiba

Specifications of TMP86xy49UG/F/NG

• Package: LQFP64/QFP64/SDIP64
• Rom Types (m=mask,p=otp,f=flash): M/P/F
• Rom Size: 16/32/60
• Ram Size: 512/1K/2K
• Driver Led: 13
• Driver Lcd: -
• Spi/sio Channels: 2
• Uart/sio Channels: 2
• I2c/sio Channels: 1
• High-speed Serial Output: -
• Adc 8-bit Channels: -
• Adc 10-bit Channels: 16
• Da Converter Channels: -
• Timer Counter 18-bit Channel: -
• Timer Counter 16-bit Channel: 2
• Timer Counter 8-bit Channel: 4
• Motor Channels: -
• Watchdog Timer: Y
• Dual Clock: Y
• Clock Gear: -
• Number Of I/o Ports: 56
• Power Supply (v): 4.5 to 5.5

14.3 Function
SIO1CR<SIOS>
SIO1SR<SIOF>
SIO1SR<SEF>
SCK1
SI1 pin
SIO1SR<RXF>
INTSIO1
interrupt
request
SIO1RDB
pin
Figure 14-11 Example of External Clock and MSB Receive Mode
(4)
tents, the received data is ignored while the SIO1SR<RXERR> is “1”.
Receive error processing
Receive errors occur on the following situation. To protect SIO1RDB and the shift register con-
• Shift operation is finished before reading out received data from SIO1RDB at
SIO1SR<RXF> is “1” in an external clock operation.
If receive error occurs, set the SIO1CR<SIOS> to “0” for reading the data that received
immediately before error occurence. And read the data from SIO1RDB. Data in shift register
(at errors occur) can be read by reading the SIO1RDB again.
When SIO1SR<RXERR> is cleared to “0” after reading the received data, SIO1SR<RXF> is
cleared to “0”.
After clearing SIO1CR<SIOS> to “0”, when 8-bit serial clock is input to
operation is stopped. To restart the receive operation, confirm that SIO1SR<SIOF> is cleared
to “0”.
If the receive error occurs, set the SIO1CR<SIOINH> to “1” for stopping the receive opera-
tion immediately. In this case, SIO1CR<SIOS>, SIO1SR register, SIO1RDB register and
SIO1TDB register are initialized.
A7 A6
Start shift
operation
A5 A4 A3 A2 A1 A0 B7 B6 B5 B4 B3 B2 B1 B0 C7 C6 C5 C4 C3 C2 C1 C0
Writing transmit
data A
Reading received data
A
Page 170
Start shift
operation
B
Start shift
operation
Writing transmit
data B
Clearing SIOS
Writing transmit
data C
C
SCK1
TMP86PM49UG
pin, receive