TMP86xy49UG/F/NG Toshiba, TMP86xy49UG/F/NG Datasheet - Page 162

• Manufacturer Part Number: TMP86xy49UG/F/NG
• Manufacturer: Toshiba

Specifications of TMP86xy49UG/F/NG

• Package: LQFP64/QFP64/SDIP64
• Rom Types (m=mask,p=otp,f=flash): M/P/F
• Rom Size: 16/32/60
• Ram Size: 512/1K/2K
• Driver Led: 13
• Driver Lcd: -
• Spi/sio Channels: 2
• Uart/sio Channels: 2
• I2c/sio Channels: 1
• High-speed Serial Output: -
• Adc 8-bit Channels: -
• Adc 10-bit Channels: 16
• Da Converter Channels: -
• Timer Counter 18-bit Channel: -
• Timer Counter 16-bit Channel: 2
• Timer Counter 8-bit Channel: 4
• Motor Channels: -
• Watchdog Timer: Y
• Dual Clock: Y
• Clock Gear: -
• Number Of I/o Ports: 56
• Power Supply (v): 4.5 to 5.5

12.9 Status Flag
12.9.1 Parity Error
12.9.2 Framing Error
12.9.3 Overrun Error
RXD1 pin
UART1SR<FERR>
INTRXD1 interrupt
UART1SR<PERR> is set to “1”. The UART1SR<PERR> is cleared to “0” when the RD1BUF is read after
reading the UART1SR.
The UART1SR<FERR> is cleared to “0” when the RD1BUF is read after reading the UART1SR.
Shift register
UART1SR<OERR> is set to “1”. In this case, the receive data is discarded; data in RD1BUF are not affected.
The UART1SR<OERR> is cleared to “0” when the RD1BUF is read after reading the UART1SR.
Shift register
RXD1 pin
UART1SR<PERR>
INTRXD1 interrupt
When parity determined using the receive data bits differs from the received parity bit, the parity error flag
When “0” is sampled as the stop bit in the receive data, framing error flag UART1SR<FERR> is set to “1”.
When all bits in the next data are received while unread data are still in RD1BUF, overrun error flag
Figure 12-6 Generation of Framing Error
Figure 12-5 Generation of Parity Error
xxxx0 **
xxx0 **
Final bit
Parity
Page 145
pxxxx0
xxxx0
Stop
*
*
Stop
1pxxxx0
0xxxx0
After reading UART1SR then
RD1BUF clears FERR.
After reading UART1SR then
RD1BUF clears PERR.
TMP86PM49UG