TMP92xy29FG Toshiba, TMP92xy29FG Datasheet - Page 320

• Manufacturer Part Number: TMP92xy29FG
• Manufacturer: Toshiba

Specifications of TMP92xy29FG

• Package: QFP176
• Rom Types(m=mask,p=otp, F=flash,e=eeprom): Romless
• Rom Combinations: Romless
• Ram Combinations: 144
• Architecture: 32-bit CISC
• Usb/spi Channels: 1/1
• Uart/sio Channels: 2
• I2c/sio Bus Channels: 1
• (s)dram Controller: 1
• Adc 10-bit Channel: 6
• Da Converter: -
• Timer 8-bit Channel: 8
• Timer 16-bit Channel: 2
• Pwm 8-bit Channels: -
• Pwm 16-bit Channels: -
• Cs/wait Controller: 4
• Dual Clock: Y
• Number Of I/o Ports: 98
• Power Supply Voltage(v): 3.0 to 3.6

3.15 Serial Channels (SIO)
• UART mode
• I/O interface mode
mode (Asynchronous transmission) or I/O interface mode (Synchronous transmission) can be
selected. And, SIO0 and SIO1 include data modulator that supports the IrDA 1.0 infrared data
communication specification.
the master controller start slave controllers via a serial link (A multi-controller system).
buffer and control circuit, transmission buffer and control circuit.
operation of channel 0 is explained below.
The TMP92CF29A include 2 serials I/O channel (SIO0 and SIO1). For channels either UART
In mode 1 and mode 2, a parity bit can be added. Mode 3 has a wakeup function for making
Figure 3.15.1 is block diagrams for each channel.
Each channel is compounded mainly prescaler, serial clock generation circuit, receiving
Each channel can be used independently.
Each channel operates in the same fashion except for the following points; hence only the
Pin name
IrDA mode
Table 3.15.1 Differences between Channels 0 to 1
TXD0 (P90 or PP3)
RXD0 (P91 or PP4)
CTS
0
, SCLK0 (P92 or PP5)
Mode 1:
Mode 2:
Mode 3:
Mode 0:
Channel 0
92CF29A-318
Yes
For transmitting and receiving I/O data using the
synchronizing signal SCLK for extending I/O.
7-bit data
8-bit data
9-bit data
TXD1 (P90 or PP3)
RXD1 (P91 or PP4)
CTS
1
, SCLK1 (P92 or PP5)
Channel 1
Yes
TMP92CF29A
2009-06-11