TMP92xy29FG Toshiba, TMP92xy29FG Datasheet - Page 203

• Manufacturer Part Number: TMP92xy29FG
• Manufacturer: Toshiba

Specifications of TMP92xy29FG

• Package: QFP176
• Rom Types(m=mask,p=otp, F=flash,e=eeprom): Romless
• Rom Combinations: Romless
• Ram Combinations: 144
• Architecture: 32-bit CISC
• Usb/spi Channels: 1/1
• Uart/sio Channels: 2
• I2c/sio Bus Channels: 1
• (s)dram Controller: 1
• Adc 10-bit Channel: 6
• Da Converter: -
• Timer 8-bit Channel: 8
• Timer 16-bit Channel: 2
• Pwm 8-bit Channels: -
• Pwm 16-bit Channels: -
• Cs/wait Controller: 4
• Dual Clock: Y
• Number Of I/o Ports: 98
• Power Supply Voltage(v): 3.0 to 3.6

3.9.5
(1) BOOT mode
(2) Memory map of the On-Chip ROM
(3) Reset/interrupt address select circuitry
This section describes the on-chip ROM.
Note: Since the last 16-byte area (FFFFF0H to FFFFFFH) is reserved for an emulator, this area is not remapped by
On-Chip ROM Control
AM1
reset.
from 3FE000H to 3FFFFFH.
FFFFEFH (area (A)) in the TLCS-900/H1.
reset/interrupt vector address select circuitry.
3FFF00H to 3FFFEFH (area (B)). By clearing the BROMCR<VACE> bit to 0 after the
boot sequence, the vector area can be remapped to the area (A). Therefore, the area (A)
can be used only for the system routine.
this register has no effect.
0
0
1
1
The TMP92CF29A boots in BOOT mode following the AM1 and AM0 settings upon
The On-Chip ROM consists of 8-Kbyte masked ROM and is located in the memory area
The reset/interrupt vector area is located in the memory area from FFFF00H to
Since the boot ROM is located in the different area, the TMP92CF29A supports
In BOOT mode, the reset/interrupt vector area is located in the memory area from
This BROMCR<VACE> bit is initialized to 1 in BOOT mode. In any other start mode,
clearing the BROMCR<VACE> bit.
AM0
0
1
0
1
FFFF00H
000000H
3FE000H
3FFF00H
04A000H
400000H
Boots from the on-chip Boot ROM (32-bit on-chip MROM)
Boots from external memory using a 16-bit data bus
92CF29A-201
On-Chip Boot ROM
On-Chip I/O , RAM
(8 Kbytes)
Don’t use this setting
Don’t use this setting
Start mode
(B) Reset/Interrupt
(A) Reset/Interrupt
Vector area
(256 bytes)
Vector area
(256 bytes)
TMP92CF29A
2009-06-11