MCIMX53-START Freescale Semiconductor, MCIMX53-START Datasheet - Page 10

• Manufacturer Part Number: MCIMX53-START
• Description: KIT DEVELOPMENT I.MX53
• Manufacturer: Freescale Semiconductor
• Series: i.MX53r
• Type: MCUr

Specifications of MCIMX53-START

• Contents: Board
• Silicon Manufacturer: Freescale
• Core Architecture: ARM
• Core Sub-architecture: Cortex - A8
• Silicon Core Number: I.MX5
• Silicon Family Name: I.MX53
• Peak Reflow Compatible (260 C): Yes
• Rohs Compliant: Yes
• Leaded Process Compatible: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: i.MX53
• Lead Free Status / Rohs Status: Supplier Unconfirmed

Modules List
10
ESDHCV3-3 Ultra-High-
ESDHCV2-1
ESDHCV2-2
ESDHCv2-4
FLEXCAN-1
FLEXCAN-2
Mnemonic
Block
FEC
FIRI
Speed eMMC /
SD Host
Controller
Enhanced
Multi-Media Card
/
Secure Digital
Host Controller
Fast Ethernet
Controller
Fast Infrared
Interface
Flexible
Controller Area
Network
Block Name
i.MX53xD Applications Processors for Consumer Products, Rev. 1
Table 2. i.MX53xD Digital and Analog Blocks (continued)
Connectivity
Peripherals
Connectivity
Peripherals
Connectivity
Peripherals
Connectivity
Peripherals
Subsystem
Ultra high-speed eMMC / SD host controller, enhanced to support eMMC
4.4 standard specification, for 832 MBps.
ESDHCV3 is backward compatible to ESDHCV2 and supports all the
features of ESDHCV2 as described below.
Enhanced multimedia card / secure digital host controller
The generic features of the eSDHCv2 module, when serving as SD / MMC
host, include the following:
The Ethernet media access controller (MAC) is designed to support both
10 Mbps and 100 Mbps Ethernet/IEEE Std 802.3™ networks. An external
transceiver interface and transceiver function are required to complete the
interface to the media.
The i.MX53xD also consists of HW assist for IEEE1588™ standard. See,
TSU and CE_RTC (IEEE1588) section for more details.
Fast infrared interface
The controller area network (CAN) protocol was primarily, but not
exclusively, designed to be used as a vehicle serial data bus. Meets the
following specific requirements of this application: real-time processing,
reliable operation in the EXTMC environment of a vehicle,
cost-effectiveness and required bandwidth. The FLEXCAN is a full
implementation of the CAN protocol specification, Version 2.0 B (ISO
11898), which supports both standard and extended message frames at
1 Mbps.
• Port 3 is specifically enhanced to support eMMC 4.4 specification, for
• Ports 1, 2, and 4 are compatible with the “MMC System Specification”
• Can be configured either as SD / MMC controller
• Supports eSD and eMMC standard, for SD/MMC embedded type cards
• Conforms to SD Host Controller Standard Specification, version 2.0, full
• Compatible with the SD Memory Card Specification, version 1.1
• Compatible with the SDIO Card Specification, version 1.2
• Designed to work with SD memory, miniSD memory, SDIO, miniSDIO,
• Configurable to work in one of the following modes:
• Full/high speed mode.
• Host clock frequency variable between 32 kHz to 52 MHz
• Up to 200 Mbps data transfer for SD/SDIO cards using 4 parallel data
• Up to 416 Mbps data transfer for MMC cards using 8 parallel data lines
double data rate (832 Mbps, 8-bit port).
version 4.3, full support and supporting 1, 4 or 8-bit data.
support.
SD Combo, MMC and MMC RS cards
lines
- SD/SDIO 1-bit, 4-bit
- MMC 1-bit, 4-bit, 8-bit
Brief Description
Freescale Semiconductor