UPD78F0551MA-FAA-AX Renesas Electronics America, UPD78F0551MA-FAA-AX Datasheet - Page 60

• Manufacturer Part Number: UPD78F0551MA-FAA-AX
• Description: MCU 8BIT 16-SSOP
• Manufacturer: Renesas Electronics America
• Series: 78K0/Kx2-Lr

Specifications of UPD78F0551MA-FAA-AX

• Core Processor: 78K/0
• Core Size: 8-Bit
• Speed: 10MHz
• Connectivity: I²C, LIN, UART/USART
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 9
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

78K0/Kx2-L
(1) Port mode
(2) Control mode
R01UH0028EJ0400 Rev.4.00
Sep 27, 2010
The following operation modes can be specified in 1-bit units.
P30 to P37 function as an I/O port. P30 to P37 can be set to input or output port in 1-bit units using port mode
register 3 (PM3). Use of an on-chip pull-up resistor can be specified by pull-up resistor option register 3 (PU3).
P30 to P37 function as external interrupt request input, timer I/O, clock input and data I/O for flash memory
programmer/on-chip debugger, and clock I/O and data I/O for serial interface.
(a) INTP1 to INTP4
(b) TI51
(c) TO51
(d) TOH1
(e) TOOLC1
(f) TOOLD1
(g) SCK11
(h) SI11
(i)
Remark
These are external interrupt request input pins for which the valid edge (rising edge, falling edge, or both rising
and falling edges) can be specified.
This is an external count clock input pin to 8-bit timer/event counter 51.
This is a timer output pin from 8-bit timer/event counter 51.
This is a timer output pin of 8-bit timer H1.
This is a clock input pin for flash memory programmer/on-chip debugger.
This is a data I/O pin for flash memory programmer/on-chip debugger.
This is a serial clock I/O pin of serial interface CSI11.
This is a serial data input pin of serial interface CSI11.
SO11
This is a serial data output pin of serial interface CSI11.
For how to connect a flash memory programmer using TOOLC1/P31, TOOLD1/P32, refer to CHAPTER 25
FLASH MEMORY. For how to connect TOOLC1/P31, TOOLD1/P32 and an on-chip debug emulator, refer
to CHAPTER 26 ON-CHIP DEBUG FUNCTION.
CHAPTER 2 PIN FUNCTIONS
46