D12363VF33V Renesas Electronics America, D12363VF33V Datasheet - Page 733

• Manufacturer Part Number: D12363VF33V
• Description: IC H8S/2363 MCU ROMLESS 128QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of D12363VF33V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 84
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 128-QFP
• For Use With: YR0K42378FC000BA - KIT EVAL FOR H8S/2378
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

16.4.4
A/D conversion can be externally triggered. When the TRGS1 and TRGS0 bits are set to 11 in
ADCR, external trigger input is enabled at the ADTRG pin. A falling edge at the ADTRG pin sets
the ADST bit to 1 in ADCSR, starting A/D conversion. Other operations, in both single and scan
modes, are the same as when the bit ADST has been set to 1 by software. Figure 16.3 shows the
timing.
16.5
The A/D converter generates an A/D conversion end interrupt (ADI) at the end of A/D conversion.
Setting the ADIE bit to 1 enables an ADI interrupt requests while the bit ADF in ADCSR is set to
1 after A/D conversion is completed. The DTC or DMAC can be activated by an ADI interrupt.
Having the converted data read by the DTC or DMAC in response to an ADI interrupt enables
continuous conversion to be achieved without imposing a load on software.
Table 16.5 A/D Converter Interrupt Source
Name
ADI
φ
ADTRG
Internal trigger signal
ADST
External Trigger Input Timing
Interrupts
Interrupt Source
End of conversion
Figure 16.3 External Trigger Input Timing
Interrupt Flag
ADF
Rev.6.00 Mar. 18, 2009 Page 673 of 980
DTC Activation
Possible
A/D conversion
Section 16 A/D Converter
DMAC Activation
Possible
REJ09B0050-0600