R5F21324ANSP#U1 Renesas Electronics America, R5F21324ANSP#U1 Datasheet - Page 599

• Manufacturer Part Number: R5F21324ANSP#U1
• Description: MCU 1KB FLASH 16K ROM 20-LSSOP
• Manufacturer: Renesas Electronics America
• Series: R8C/3x/32Ar

Specifications of R5F21324ANSP#U1

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, PWM, Voltage Detect, WDT
• Number Of I /o: 15
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 20-LSSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Under development
R8C/32A Group
REJ09B0458-0020 Rev.0.20
Page 569 of 583
33.10 Notes on Serial Interface (UART0)
•
•
When reading data from the U0RB register either in clock synchronous serial I/O mode or in clock asynchronous
serial I/O mode, always read data in 16-bit units.
When the high-order byte of the U0RB register is read, bits PER and FER in the U0RB register and the RI bit in
the U0C1 register are set to 0.
To check receive errors, read the U0RB register and then use the read data.
When writing data to the U0TB register in clock asynchronous serial I/O mode with 9-bit transfer data length,
write data to the high-order byte first and then the low-order byte, in 8-bit units.
Program example to read the receive buffer register:
Program example to write to the transmit buffer register:
MOV.W
MOV.B
MOV.B
Preliminary specification
Specifications in this manual are tentative and subject to change.
00A6H,R0
#XXH,00A3H
#XXH,00A2H
Nov 05, 2008
; Read the U0RB register
; Write to the high-order byte of the U0TB register
; Write to the low-order byte of the U0TB register
33. Usage Notes