MCF5407AI220 Freescale Semiconductor, MCF5407AI220 Datasheet - Page 142

• Manufacturer Part Number: MCF5407AI220
• Description: IC MPU 32B 220MHZ COLDF 208-FQFP
• Manufacturer: Freescale Semiconductor
• Series: MCF540xr

Specifications of MCF5407AI220

• Core Processor: Coldfire V4
• Core Size: 32-Bit
• Speed: 220MHz
• Connectivity: EBI/EMI, I²C, UART/USART
• Peripherals: DMA, WDT
• Number Of I /o: 16
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 208-FQFP
• Maximum Clock Frequency: 220 MHz
• Operating Supply Voltage: 1.8 V, 3.3 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: 0 C
• Program Memory Size: 24KB
• Cpu Speed: 220MHz
• Embedded Interface Type: I2C, UART
• Digital Ic Case Style: FQFP
• No. Of Pins: 208
• Supply Voltage Range: 3.3V
• Rohs Compliant: Yes
• For Use With: M5407C3 - KIT EVAL FOR MCF5407 W/ETHERNET
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Cache Operation
4.9.5.2 Cache Pushes
Cache pushes occur for line replacement and as required for the execution of the CPUSHL
instruction. To reduce the requested data’s latency in the new line, the modified line being
replaced is temporarily placed in the push buffer while the new line is fetched from
memory. After the bus transfer for the new line completes, the modified cache line is written
back to memory and the push buffer is invalidated.
4.9.5.2.1 Push and Store Buffers
The 16-byte push buffer reduces latency for requested new data on a cache miss by holding
a displaced modified data cache line while the new data is read from memory.
If a cache miss displaces a modified line, a miss read reference is immediately generated.
While waiting for the response, the current contents of the cache location load into the push
buffer. When the burst-read bus transaction completes, the cache controller can generate the
appropriate line-write bus transaction to write the push buffer contents into memory.
In imprecise mode, the FIFO store buffer can defer pending writes to maximize
performance. The store buffer can support as many as four entries (16 bytes maximum) for
this purpose.
Data writes destined for the store buffer cannot stall the core. The store buffer effectively
provides a measure of decoupling between the pipeline’s ability to generate writes (one per
cycle maximum) and the external bus’s ability to retire those writes. In imprecise mode,
writes stall only if the store buffer is full and a write operation is on the internal bus. The
internal write cycle is held, stalling the data execution pipeline.
If the store buffer is not used (that is, store buffer disabled or cache-inhibited precise mode),
external bus cycles are generated directly for each pipeline write operation. The instruction
is held in the pipeline until external bus transfer termination is received. Therefore, each
write is stalled for 5 cycles, making the minimum write time equal to 6 cycles when the
store buffer is not used. See Section 2.1.2.2, “Operand Execution Pipeline (OEP).”
The data store buffer enable bit, CACR[DESB], controls the enabling of the data store
buffer. This bit can be set and cleared by the MOVEC instruction. DESB is zero at reset and
all writes are performed in order (precise mode). ACRn[CM] or CACR[DDCM] generates
the mode used when DESB is set. Cacheable write-through and cache-inhibited imprecise
modes use the store buffer.
The store buffer can queue data as much as 4 bytes wide per entry. Each entry matches the
corresponding bus cycle it generates; therefore, a misaligned longword write to a
write-through region creates two entries if the address is to an odd-word boundary. It
creates three entries if it is to an odd-byte boundary—one per bus cycle.
4.9.5.2.2 Push and Store Buffer Bus Operation
As soon as the push or store buffer has valid data, the internal bus controller uses the next
available external bus cycle to generate the appropriate write cycles. In the event that
MCF5407 User’s Manual
4-18