HW-SPAR3E-SK-US-G Xilinx Inc, HW-SPAR3E-SK-US-G Datasheet - Page 92

• Manufacturer Part Number: HW-SPAR3E-SK-US-G
• Description: KIT STARTER SPARTAN-3E
• Manufacturer: Xilinx Inc

Specifications of HW-SPAR3E-SK-US-G

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 122-1507

Chapter 12: SPI Serial Flash
Configuring from SPI Flash
92
Setting the FPGA Mode Select Pins
Select SPI Mode using Jumper Settings
Remove the top jumper, insert the bottom two as shown
DONE Pin LED
Lights up when FPGA successfully configured
To configure the FPGA from SPI Flash, the FPGA mode select pins must be set
appropriately and the SPI Flash must contain a valid configuration image.
Set the FPGA configuration mode pins for SPI mode, as shown in
of the configuration mode jumpers (J30) appears in
Figure 12-3: Configuration Options for SPI Mode
Figure 12-4: Set Mode Pins for SPI Mode
Jumper JP8 (XSPI)
When programming SPI Flash using XSPI
utility, insert jumper to hold PROG_B pin Low
www.xilinx.com
M0
M1
M2
UG230_c15_03_030206
J30
Spartan-3E FPGA Starter Kit Board User Guide
Header J12 (XSPI Programming)
PROG_B Push Button Switch
Press and release to restart configuration
Figure
12-3.
UG230 (v1.2) January 20, 2011
Figure
Jumper J11
12-4. The location
UG230_c15_02_030906
R