MC-78F0712-KIT Renesas Electronics America, MC-78F0712-KIT Datasheet - Page 124

• Manufacturer Part Number: MC-78F0712-KIT
• Description: KIT REF SYSTEM 78K0 UPD78F0712
• Manufacturer: Renesas Electronics America

Specifications of MC-78F0712-KIT

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

122
Note The one-shot pulse output mode operates correctly only in the free-running mode and the mode in which
Cautions 1. Timer operation must be stopped before setting other than TOC004.
Address: FF6BH
Symbol
TOC00
clear & start occurs at the TI000 pin valid edge. In the mode in which clear & start occurs on a match
between the TM00 register and CR00 register, one-shot pulse output is not possible because an overflow
does not occur.
2. If LVS00 and LVR00 are read, 0 is read.
3. OSPT00 is automatically cleared after data is set, so 0 is read.
4. Do not set OSPT00 to 1 other than in one-shot pulse output mode.
5. A write interval of two cycles or more of the count clock selected by prescaler mode register
6. Do not set LVS00 to 1 before TOE00, and do not set LVS00 and TOE00 to 1 simultaneously.
00 (PRM00) is required to write to OSPT00 successively.
OSPT00
OSPE00
TOC004
TOC001
TOE00
LVS00
Figure 7-7. Format of 16-Bit Timer Output Control Register 00 (TOC00)
7
0
0
1
0
1
0
1
0
0
1
1
0
1
0
1
After reset: 00H
No one-shot pulse trigger
One-shot pulse trigger
Successive pulse output mode
One-shot pulse output mode
Disables inversion operation
Enables inversion operation
Disables inversion operation
Enables inversion operation
Disables output (output fixed to level 0)
Enables output
OSPT00
LVR00
<6>
0
1
0
1
CHAPTER 7 16-BIT TIMER/EVENT COUNTER 00
R/W
No change
Timer output F/F reset (0)
Timer output F/F set (1)
Setting prohibited
OSPE00
<5>
Timer output F/F control using match of CR01 and TM00
Timer output F/F control using match of CR00 and TM00
User’s Manual U17890EJ2V0UD
One-shot pulse output trigger control via software
One-shot pulse output operation control
TOC004
Note
4
Timer output control
Timer output F/F status setting
LVS00
<3>
LVR00
<2>
TOC001
1
TOE00
<0>