MC-78F0712-KIT Renesas Electronics America, MC-78F0712-KIT Datasheet - Page 123

• Manufacturer Part Number: MC-78F0712-KIT
• Description: KIT REF SYSTEM 78K0 UPD78F0712
• Manufacturer: Renesas Electronics America

Specifications of MC-78F0712-KIT

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

(3) 16-bit timer output control register 00 (TOC00)
(2) Capture/compare control register 00 (CRC00)
Cautions 1. Timer operation must be stopped before setting CRC00.
This register controls the operation of the 16-bit timer capture/compare registers (CR00, CR01).
CRC00 can be set by a 1-bit or 8-bit memory manipulation instruction.
RESET input clears CRC00 to 00H.
This register controls the operation of 16-bit timer/event counter 00 output controller. It sets/resets the timer
output F/F, enables/disables output inversion and 16-bit timer/event counter 00 timer output, enables/disables the
one-shot pulse output operation, and sets the one-shot pulse output trigger via software.
TOC00 can be set by a 1-bit or 8-bit memory manipulation instruction.
RESET input clears TOC00 to 00H.
Address: FF6AH
Symbol
CRC00
2. When the mode in which clear & start occurs on a match between TM00 and CR00 is selected
3. The capture operation is not performed if both the rising and falling edges are specified as
4. To ensure that the capture operation is performed properly, the capture trigger requires a
with 16-bit timer mode control register 00 (TMC00), CR00 should not be specified as a capture
register.
the valid edge of the TI000 pin.
pulse two cycles longer than the count clock selected by prescaler mode register 00
(PRM00).
CRC002
CRC001
CRC000
7
0
0
1
0
1
0
1
Figure 7-6. Format of Capture/Compare Control Register 00 (CRC00)
After reset: 00H
Operates as compare register
Operates as capture register
Captures on valid edge of TI001 pin
Captures on valid edge of TI000 pin by reverse phase
Operates as compare register
Operates as capture register
6
0
CHAPTER 7 16-BIT TIMER/EVENT COUNTER 00
R/W
User’s Manual U17890EJ2V0UD
5
0
CR01 operating mode selection
CR00 operating mode selection
CR00 capture trigger selection
4
0
3
0
CRC002
2
CRC001
1
CRC000
0
121