DV164136 Microchip Technology, DV164136 Datasheet - Page 195

• Manufacturer Part Number: DV164136
• Description: DEVELOPMENT KIT FOR PIC18
• Manufacturer: Microchip Technology
• Series: PIC®r
• Type: MCUr

Specifications of DV164136

• Contents: Board, Cables, CDs, PICkit™ 3 Programmer, Power Supply
• Processor To Be Evaluated: PIC18F8722, PIC18F87J11
• Interface Type: RS-232, USB
• Operating Supply Voltage: 3.3 V, 5 V
• Silicon Manufacturer: Microchip
• Core Architecture: PIC
• Core Sub-architecture: PIC18
• Silicon Core Number: PIC18F
• Silicon Family Name: PIC18F8xxx
• Kit Contents: PIC18 Exp Brd PICkit 3 Cable CD PSU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: PIC18F8722, PIC18F87J11
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

16.0
The Timer4 timer module has the following features:
• 8-bit timer register (TMR4)
• 8-bit period register (PR4)
• Readable and writable (both registers)
• Software programmable prescaler (1:1, 1:4, 1:16)
• Software programmable postscaler (1:1 to 1:16)
• Interrupt on TMR4 match of PR4
Timer4 has a control register shown in Register 16-1.
Timer4 can be shut off by clearing control bit, TMR4ON
(T4CON<2>), to minimize power consumption. The
prescaler and postscaler selection of Timer4 are also
controlled by this register. Figure 16-1 is a simplified
block diagram of the Timer4 module.
REGISTER 16-1:
© 2009 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6-3
bit 2
bit 1-0
U-0
—
TIMER4 MODULE
Unimplemented: Read as ‘0’
T4OUTPS3:T4OUTPS0: Timer4 Output Postscale Select bits
0000 = 1:1 Postscale
0001 = 1:2 Postscale
•
•
•
1111 = 1:16 Postscale
TMR4ON: Timer4 On bit
1 = Timer4 is on
0 = Timer4 is off
T4CKPS1:T4CKPS0: Timer4 Clock Prescale Select bits
00 = Prescaler is 1
01 = Prescaler is 4
1x = Prescaler is 16
T4OUTPS3
R/W-0
T4CON: TIMER4 CONTROL REGISTER
W = Writable bit
‘1’ = Bit is set
T4OUTPS2
R/W-0
T4OUTPS1
R/W-0
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
T4OUTPS0
PIC18F87J11 FAMILY
R/W-0
16.1
Timer4 can be used as the PWM time base for the
PWM mode of the ECCPx/CCPx modules. The TMR4
register is readable and writable and is cleared on any
device Reset. The input clock (F
option of 1:1, 1:4 or 1:16, selected by control bits
T4CKPS1:T4CKPS0 (T4CON<1:0>). The match out-
put of TMR4 goes through a 4-bit postscaler (which
gives a 1:1 to 1:16 scaling inclusive) to generate a
TMR4 interrupt, latched in flag bit, TMR4IF (PIR3<3>).
The prescaler and postscaler counters are cleared
when any of the following occurs:
• a write to the TMR4 register
• a write to the T4CON register
• any device Reset (Power-on Reset, MCLR Reset,
TMR4 is not cleared when T4CON is written.
Watchdog Timer Reset or Brown-out Reset)
Timer4 Operation
TMR4ON
R/W-0
x = Bit is unknown
T4CKPS1
R/W-0
OSC
DS39778D-page 195
/4) has a prescale
T4CKPS0
R/W-0
bit 0