PEB2256E INFINEON [Infineon Technologies AG], PEB2256E Datasheet - Page 420

no-image

PEB2256E

Manufacturer Part Number
PEB2256E
Description
E1/T1/J1 Framer and Line Interface Component for Long and Short Haul Applications
Manufacturer
INFINEON [Infineon Technologies AG]
Datasheet
Bit Error Counter (Read)
BECL
BECH
BEC(15:0)
Data Sheet
BEC15
BEC7
7
7
Bit Error Counter
If the PRBS monitor is enabled by LCR1.EPRM = 1 this 16-bit counter
is incremented with every received PRBS bit error in the PRBS
synchronous state FRS1.LLBAD = 1. The error counter does not roll
over.
During alarm simulation, the counter is incremented continuously with
every second received bit.
Clearing and updating the counter is done according to bit
FMR1.ECM.
If this bit is reset the error counter is permanently updated in the
buffer. For correct read access of the PRBS bit error counter bit
DEC.DBEC has to be set. With the rising edge of this bit updating the
buffer is stopped and the error counter is reset. Bit DEC.DBEC is
automatically reset with reading the error counter high byte.
If FMR1.ECM is set every second (interrupt ISR3.SEC) the error
counter is latched and then automatically reset. The latched error
counter state should be read within the next second.
420
T1/J1 Registers
BEC0
BEC8
FALC56 V1.2
0
0
PEB 2256
2002-08-27
(58)
(59)

Related parts for PEB2256E