SPC8106 S-MOS Systems, SPC8106 Datasheet - Page 290

• Manufacturer Part Number: SPC8106
• Description: LCD/CRT VGA CONTROLLER
• Manufacturer: S-MOS Systems

1.3.0.2
SETFONT can be loaded as a device driver. Place a line with the following format in the CON-
FIG.SYS file.
Example:
Font changes stipulated in the CONFIG.SYS take effect on boot-up and remain in effect until
altered by running SETFONT from the DOS prompt.
1.3.0.3
Running SETFONT without parameters produces a menu interface (see below). The menu dis-
plays the current state and a font preview window displays the currently selected font. To select an
option from a menu, move the highlight using the UP- or DOWN-arrow keys. With the desired
options highlighted press ENTER to make the changes and exit SETFONT.
1.4
SETFONT.EXE Display Utility
UY1-4
•
•
•
device=[path]setfont.exe [-iFontHeight] [-sScanLines ]
When SETFONT is run a portion of the program remains resident in memory and occupies approximately 8K
bytes of memory.
Some application programs assume a static font height and loading a different sized font may produce unex-
pected results in the display.
The internal 19-point display font is actually a stretched 16-point font on an LCD display. Selecting the 19-
point font selects Text Vertical Expansion Enable.
Comments
S-MOS Systems, Inc. • Tel: [phone] • Fax: [phone] • http://www.smos.com
DOS Device Driver
Menu Interface
the line device=c:\bin\ setfont.exe -i8 -s480 in your config.sys file will set
the display to 80 x 60 display mode. DOS will now operate with 60 visible lines on
the screen verses the original 25 lines.
Figure 1 : SETFONT Menu Interface
411-1.0
SPC8106