M69030 Asiliant Technologies, M69030 Datasheet - Page 138

no-image

M69030

Manufacturer Part Number
M69030
Description
Manufacturer
Asiliant Technologies
Datasheet

Specifications of M69030

Operating Temperature (min)
0C
Operating Temperature Classification
Commercial
Operating Temperature (max)
70C
Rad Hardened
No
Lead Free Status / Rohs Status
Supplier Unconfirmed

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
M69030
Quantity:
5 510
Part Number:
M69030
Quantity:
5 510
Part Number:
M69030
Manufacturer:
CHIPS
Quantity:
20 000
Part Number:
M69030P
Manufacturer:
MIT
Quantity:
20 000
9-36
CR3C
read/write at I/O address 3B5h/3D5h with index at address 3B4h/3D4h set to 3Ch
7-6
5-0
`efmp
A
B
Horizontal Blanking End Bits 7and 6
The horizontal blanking end is a 6-bit or 8-bit value that specifies the end of the horizontal blanking
period relative to its beginning.
Reserved
69030 Databook
Horizontal Blank End
Horizontal Blank End
7
Bits 7 and 6
Bits 7 and 6
Extended Horizontal Blanking End Register
In standard VGA modes, where bit 0 of the I/O Control Register (XR09) is set to 0, the
horizontal blanking end is specified with a 6-bit value. The 5 least significant bits of this
value are supplied by bits 4-0 of the Horizontal Blanking End Register (CR03), and the most
significant bit is supplied by bit 7 of the Horizontal Sync End Register (CR05). In standard
VGA modes, this bit is not used.
In extended modes, where bit 0 of the I/O Control Register (XR09) is set to 1, the horizontal
blanking end is specified with an 8-bit value. The 5 least significant bits of this value are
supplied by bits 4-0 of the Horizontal Blanking End Register (CR03), the next most
significant bit is supplied by bit 7 of the Horizontal Sync End Register (CR05), and both the
most significant and 2nd most significant bits are supplied by bits 7 and 6, respectively, of
this register.
This 6-bit or 8-bit value should be programmed to be equal to the least significant 6 or 8
bits, respectively, of the result of adding the length of the blanking period in terms of
character clocks to the value specified in the Horizontal Blanking Start Register (CR02).
These bits should always be written with the value of 0
(00)
(00)
6
5
CRT Controller Registers
4
3
Reserved
(00:0000)
Reserved
(00:0000)
2
Revision 1.3 11/24/99
1
0

Related parts for M69030