DS33R41+ Maxim Integrated Products, DS33R41+ Datasheet - Page 178

• Manufacturer Part Number: DS33R41+
• Description: IC TXRX ETHERNET MAP 400-BGA
• Manufacturer: Maxim Integrated Products
• Type: Transceiverr

Specifications of DS33R41+

• Number Of Drivers/receivers: 4/4
• Protocol: T1/E1/J1
• Voltage - Supply: 3.14 V ~ 3.47 V
• Mounting Type: Surface Mount
• Package / Case: 400-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Bit 8: Automatic Pad Stripping (ASTP). When set to 1, all incoming frames with less than 46 byte length are
automatically stripped of the pad characters and FCS.
Bits 7 and 6: Back-Off Limit (BOLMT[1:0]). These two bits allow the user to set the back-off limit used for the
maximum retransmission delay for collided packets. Default operation limits the maximum delay for retransmission
to a countdown of 10 bits from a random number generator. The user can reduce the maximum number of counter
bits as described in the table below. See IEEE 802.3 for details of the back-off algorithm.
Bit 5: Deferral Check (DC). When set to 1, the MAC will abort packet transmission if it has deferred for more than
24,288 bit times.The deferral counter starts when the transmitter is ready to transmit a packet, but is prevented
from transmission because CRS is active. If the MAC begins transmission but a collision occurs after the beginning
of transmission, the deferral counter is reset again. If this bit is equal to zero, then the MAC will defer indefinitely.
Bit 3: Transmitter Enable (TE). When set to 1, packet transmission is enabled. When equal to zero, transmission
is disabled.
Bit 2: Receiver Enable (RE). When set to 1, packet reception is enabled. When equal to zero, packets are not
received.
Bit 7
0
0
1
1
Bit 6
0
1
0
1
Random Number Generator Bits
Used
10
8
4
1
178 of 335