LAN9420I-NU Standard Microsystems (SMSC), LAN9420I-NU Datasheet - Page 97

no-image

LAN9420I-NU

Manufacturer Part Number
LAN9420I-NU
Description
Manufacturer
Standard Microsystems (SMSC)
Datasheet

Specifications of LAN9420I-NU

Operating Supply Voltage (typ)
3.3V
Operating Supply Voltage (min)
3V
Operating Supply Voltage (max)
3.6V
Operating Temperature Classification
Industrial
Mounting
Surface Mount
Pin Count
128
Lead Free Status / RoHS Status
Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
LAN9420I-NU
Manufacturer:
Standard
Quantity:
368
Part Number:
LAN9420I-NU
Manufacturer:
SMSC
Quantity:
7 468
Part Number:
LAN9420I-NU
Manufacturer:
Microchip Technology
Quantity:
10 000
Single-Chip Ethernet Controller with HP Auto-MDIX Support and PCI Interface
Datasheet
SMSC LAN9420/LAN9420i
4.2.9
31:11
BITS
7:5
4:3
2:0
10
9
8
RESERVED
PHY Reset (PHY_RST)
Writing a ‘1’ to this bit resets the PHY. The internal logic automatically holds
the PHY reset for a minimum of 100us. When the PHY is released from
reset, this bit is automatically cleared. All writes to this bit are ignored while
this bit is high.
Wake-On-Lan Wakeup Enable (WOL_EN)
When set, the MAC Wake Detect signal is enabled as a wake event and
will set the PME_STATUS in the PCI_PMCSR. The MAC Wake Detect
signal can be programmed for assertion upon detection of a Wakeup Frame
or Magic Packet.
Energy-Detect Wakeup Enable (ED_EN)
When set, the PHY Interrupt signal is enabled as a wake event and will set
the PME_STATUS bit in the PCI_PMCSR. The PHY interrupt can be
programmed for assertion upon detection of a link status change (Energy
Detect) event.
RESERVED
Wakeup Status (WUPS)
This field indicates the cause of the last wake event. This field is cleared
by writing ‘1’ to the currently set bit(s). WUPS is encoded as follows:
00b – No wakeup event detected
x1b – PHY interrupt (Energy-Detect)
1xb – MAC wakeup event (Wakeup Frame or Magic Packet)
Note:
RESERVED
Power Management Control Register (PMT_CTRL)
This register controls the wake event detection features. This register also controls the SCSR soft reset
to the PHY.
Note: If waking from a reduced-power state causes the assertion of a device reset, this register will
Offset:
If waking from a reduced-power state causes the assertion of a
device reset, the wakeup status bits will be cleared.
be cleared.
DESCRIPTION
00E0h
DATASHEET
97
Size:
32 bits
R/WC
TYPE
R/W
R/W
RO
RO
RO
SC
Revision 1.4 (12-17-08)
DEFAULT
000b
00b
0b
0b
0b
-
-

Related parts for LAN9420I-NU