LAN9420I-NU Standard Microsystems (SMSC), LAN9420I-NU Datasheet - Page 14

• Manufacturer Part Number: LAN9420I-NU
• Manufacturer: Standard Microsystems (SMSC)

Specifications of LAN9420I-NU

• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (min): 3V
• Operating Supply Voltage (max): 3.6V
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 128
• Lead Free Status / RoHS Status: Compliant

Revision 1.4 (12-17-08)
1.7.2
1.7.3
1.7.4
1.7.5
1.7.6
1.8
Control and Status Registers (CSR)
PLL and Power Management
LAN9420/LAN9420i interfaces with a 25MHz crystal oscillator from which all internal clocks, with the
exception of PCI clock, are generated. The internal clocks are all generated by the PLL and Power
Management blocks. Various power savings modes exists that allow for the clocks to be shut down.
These modes are defined by the power state of the PCI function. Please refer to
Management," on page 73
EEPROM Controller
LAN9420/LAN9420i provides support for an optional EEPROM via the EEPROM Controller. Please
refer to
GPIO/LED Controller
The 3-bit GPIO and 2-bit GPO (Multiplexed on the LED and EEPROM Pins) interface is managed by
the GPIO/LED Controller. It is accessible via the System Control and Status Registers (SCSR). The
GPIO signals can function as inputs, push-pull outputs and open drain outputs. The GPIOs can also
be configured to trigger interrupts with programmable polarity. The GPOs are outputs only and have
no means of generating interrupts.
Please refer to
page 92
General Purpose Timer
The General Purpose Timer has no dedicated function within LAN9420/LAN9420i and may be
programmed to issue a timed interrupt. Please refer to
on page 30
Free Run Counter
The Free Run Counter has no dedicated function within LAN9420/LAN9420i and may be used by the
software drivers as a timebase. Please refer to
for more information.
LAN9420/LAN9420i’s functions are controlled and monitored by the Host via the Control and Status
Registers (CSR). This register space includes registers that control and monitor the DMA controller
(DMA Control and Status Registers - DCSR), the MAC (MAC Control and Status Registers - MCSR),
the PHY (accessed indirectly through the MAC via the MII_ACCESS and MII_DATA registers), and the
elements of the System Control Block via the System Control and Status Registers (SCSR). The CSR
may be accessed be via I/O or memory operations. Big or Little Endian access is also configurable.
Section 3.3.5, "EEPROM Controller (EPC)," on page 31
for more information.
for more information.
Section 4.2.5, "General Purpose Input/Output Configuration Register (GPIO_CFG)," on
for more information.
Single-Chip Ethernet Controller with HP Auto-MDIX Support and PCI Interface
DATASHEET
14
Section 3.3.4, "Free-Run Counter (FRC)," on page 31
Section 3.3.3, "General Purpose Timer (GPT),"
for more information.
SMSC LAN9420/LAN9420i
Section 3.7, "Power
Datasheet