UPD78F0890GK(A)-GAJ-AX NEC, UPD78F0890GK(A)-GAJ-AX Datasheet - Page 708

• Manufacturer Part Number: UPD78F0890GK(A)-GAJ-AX
• Description: 8BIT MCU, 128K FLASH, 7K RAM, LQFP
• Manufacturer: NEC

Specifications of UPD78F0890GK(A)-GAJ-AX

• Controller Family/series: UPD78F
• No. Of I/o's: 55
• Ram Memory Size: 7KB
• Cpu Speed: 20MHz
• No. Of Timers: 10
• No. Of Pwm: RoHS Compliant
• Core Size: 8bit
• Program Memory Size: 128KB
• Oscillator Type: External, Internal

Note This product is under development
Remark ×××× in the part number differs depending on the host machine and OS used.
A.5.3 When using on-chip debug emulator with programming function QB-MINI2
A.6 Debugging Tools (Software)
708
Remarks 1. The QB-MINI2 is supplied with a USB interface cable and connection cables (10-pin cable and 16-pin
QB-MINI2
On-chip debug emulator with
programming function
Target connector specifications
SM+ for 78K0/Fx2
System simulator
ID78K0-QB
Integrated debugger
μ
S××××ID78K0-QB
2. Download the software for operating the QB-MINI2 from the download site for development tools
cable), and the 78K0-OCD board. A connection cable (10-pin cable) and the 78K0-OCD board are
used only when using the on-chip debug function.
(http://www.necel.com/micro/ods/eng/index.html).
Note
AB17
BB17
××××
PC-9800 series,
IBM PC/AT compatibles
This on-chip debug emulator serves to debug hardware and software when developing
application systems using the 78K0/Fx2. It is available also as flash memory
programmer dedicated to microcontrollers with on-chip flash memory. When using this
as on-chip debug emulator, it should be used in combination with a connection cable (10-
pin cable or 16-pin cable), a USB interface cable that is used to connect the host
machine, and the 78K0-OCD board.
10-pin general-purpose connector (2.54 mm pitch) or 16-pin general-purpose connector
(2.54 mm pitch)
SM+ for 78K0/Fx2 is Windows-based software.
It is used to perform debugging at the C source level or assembler level while simulating
the operation of the target system on a host machine.
Use of SM+ for 78K0/Fx2 allows the execution of application logical testing and
performance testing on an independent basis from hardware development, thereby
providing higher development efficiency and software quality.
SM+ for 78K0/FX2 should be used in combination with the device file (DF780893).
This debugger supports the in-circuit emulators for the 78K/0 Series. The ID78K0-QB is
Windows-based software.
It has improved C-compatible debugging functions and can display the results of tracing
with the source program using an integrating window function that associates the source
program, disassemble display, and memory display with the trace result. It should be
used in combination with the device file.
Part number:
Host Machine
APPENDIX A DEVELOPMENT TOOLS
User’s Manual U17554EJ4V0UD
μ
S××××ID78K0-QB
Windows (Japanese version)
Windows (English version)
OS
CD-ROM
Supply Medium