UPD78F0552MA-FAA-AX Renesas Electronics America, UPD78F0552MA-FAA-AX Datasheet - Page 57

• Manufacturer Part Number: UPD78F0552MA-FAA-AX
• Description: MCU 8BIT 16-SSOP
• Manufacturer: Renesas Electronics America
• Series: 78K0/Kx2-Lr

Specifications of UPD78F0552MA-FAA-AX

• Core Processor: 78K/0
• Core Size: 8-Bit
• Speed: 10MHz
• Connectivity: I²C, LIN, UART/USART
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 9
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

<R>
<R>
78K0/Kx2-L
2.2.2 P10 to P17 (port 1)
amplifier I/O, external interrupt request input, serial interface data I/O, clock I/O, and timer I/O.
Note Products with operational amplifier only
(1) Port mode
(2) Control mode
R01UH0028EJ0400 Rev.4.00
Sep 27, 2010
P10 to P17 function as an I/O port. These pins also function as pins for A/D converter analog input, operational
The following operation modes can be specified in 1-bit units.
(g) SSI11
P10 to P17 function as an I/O port. P10 to P17 can be set to input or output port in 1-bit units using port mode
register 1 (PM1). Use of an on-chip pull-up resistor can be specified by pull-up resistor option register 1 (PU1).
P10 to P17 function as A/D converter analog input, operational amplifier I/O, external interrupt request input, serial
interface data I/O, clock I/O, and timer I/O.
(a) ANI8 to ANI10
(b) AMP1+, AMP1-
(c) AMP1OUT
(d) SI10
(
This is a chip select input pin of serial interface CSI11.
These are A/D converter analog input pins. When using these pins as analog input pins, refer to (5) ANI0/P20
to ANI7/P27, ANI8/P10 to ANI10/P12 in 12.6 Cautions for A/D Converter.
Cautions 1. ANI8/P10 to ANI10/P12 are set in the digital input mode after release of reset.
These are operational amplifier 1 input pins.
This is an operational amplifier 1 output pin.
This is a serial data input pin of serial interface CSI10.
μ
78K0/KY2-L
PD78F055x)
16 Pins
−
−
−
−
−
−
−
−
2. Make the AV
REF
20, 25, 32 Pins
(
pin the same potential as the V
μ
78K0/KA2-L
PD78F056x)
−
−
−
−
−
−
−
−
P10/ANI8/AMP1-
P11/ANI9/AMP1OUT
P12/ANI10/AMP1+
P13/TxD6
P14/RxD6
P15/TOH0
P16/TOH1/INTP5
P17/TI50/TO50
(
μ
78K0/KB2-L
PD78F057x)
DD
30 Pins
pin when ANI8 to ANI10 are used.
Note
Note
/SCK10
Note
/SO10
/SI10
CHAPTER 2 PIN FUNCTIONS
P10/ANI8/AMP1-
P11/ANI9/AMP1OUT
P13/TxD6
P14/RxD6
P15/TOH0
P16/TOH1/INTP5
P17/TI50/TO50
P12/ANI10/AMP1+
40, 44, 48 Pins
(
μ
78K0/KC2-L
PD78F058x)
Note
Note
/SCK10
Note
/SO10
/SI10
43