UPD78F0552MA-FAA-AX Renesas Electronics America, UPD78F0552MA-FAA-AX Datasheet - Page 377

• Manufacturer Part Number: UPD78F0552MA-FAA-AX
• Description: MCU 8BIT 16-SSOP
• Manufacturer: Renesas Electronics America
• Series: 78K0/Kx2-Lr

Specifications of UPD78F0552MA-FAA-AX

• Core Processor: 78K/0
• Core Size: 8-Bit
• Speed: 10MHz
• Connectivity: I²C, LIN, UART/USART
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 9
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

78K0/Kx2-L
9.1 Functions of Watchdog Timer
signal is generated.
details of RESF, refer to CHAPTER 20 RESET FUNCTION.
R01UH0028EJ0400 Rev.4.00
Sep 27, 2010
The watchdog timer is mounted onto all 78K0/Kx2-L microcontroller products.
The watchdog timer operates on the internal low-speed oscillation clock.
The watchdog timer is used to detect an inadvertent program loop. If a program loop is detected, an internal reset
Program loop is detected in the following cases.
• If the watchdog timer counter overflows
• If a 1-bit manipulation instruction is executed on the watchdog timer enable register (WDTE)
• If data other than “ACH” is written to WDTE
• If data is written to WDTE during a window close period
• If the instruction is fetched from an area not set by the IMS register (detection of an invalid check while the CPU
• If the CPU accesses an area that is not set by the IMS register (excluding FB00H to FFFFH) by executing a
When a reset occurs due to the watchdog timer, bit 4 (WDTRF) of the reset control flag register (RESF) is set to 1. For
hangs up)
read/write instruction (detection of an abnormal access during a CPU program loop)
CHAPTER 9 WATCHDOG TIMER
CHAPTER 9 WATCHDOG TIMER
363