ATXMEGA16A4-CUR Atmel, ATXMEGA16A4-CUR Datasheet - Page 347

• Manufacturer Part Number: ATXMEGA16A4-CUR
• Description: MCU AVR 16+4KB FLASH 49VFBGA
• Manufacturer: Atmel
• Series: AVR® XMEGAr

Specifications of ATXMEGA16A4-CUR

• Core Processor: AVR
• Core Size: 8/16-Bit
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 34
• Program Memory Size: 16KB (8K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 1.6 V ~ 3.6 V
• Data Converters: A/D 12x12b, D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 49-VFBGA
• For Use With: ATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMRATSTK600 - DEV KIT FOR AVR/AVR32770-1007 - ISP 4PORT ATMEL AVR MCU SPI/JTAG770-1004 - ISP 4PORT FOR ATMEL AVR MCU SPI
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

29.3.3.1
29.3.4
8077H–AVR–12/09
Serial transmission and reception
Characters
Table 29-1.
Three different characters, DATA, BREAK and IDLE, are used. The BREAK character is equal
to 12 bit-length of low level. The IDLE character is equal to 12 bit-length of high level. Both the
BREAK and the IDLE character can be extended beyond the bit-length of 12.
Figure 29-5. Characters and timing for the PDI Physical.
The PDI physical layer is either in Transmit (TX) or Receive (RX) mode of operation. By default
it is in RX mode, waiting for a start bit.
The programmer and the PDI operate synchronously on the PDI_CLK provided by the program-
mer. The dependency between the clock edges and data sampling or data change is fixed. As
illustrated in
is always set up (changed) on the falling edge of PDI_CLK, while data is always sampled on the
rising edge of PDI_CLK.
Figure 29-6. Changing and sampling of data.
St
(0-7)
P
Sp1
Sp2
Start bit, always low.
Data bits (0 to 7)
Parity bit, even parity is used
Stop bit 1, always high.
Stop bit 2, always high.
Figure 29-6 on page
PD I_DATA
PDI_CLK
START
0
1
347, output data (either from the programmer or from the PDI)
2
Sam ple
3
1 BREAK character
1 DATA character
1 IDLE character
BREAK
4
IDLE
5
6
Sam ple
7
P
STOP
Sam ple
XMEGA A
347