EP9302-IQZ Cirrus Logic Inc, EP9302-IQZ Datasheet - Page 717

• Manufacturer Part Number: EP9302-IQZ
• Description: IC ARM9 SOC PROCESSOR 208LQFP
• Manufacturer: Cirrus Logic Inc
• Series: EP9r

Specifications of EP9302-IQZ

• Core Size: 16/32-Bit
• Core Processor: ARM9
• Speed: 200MHz
• Connectivity: EBI/EMI, Ethernet, I²C, IrDA, SPI, UART/USART, USB
• Peripherals: AC'97, DMA, I&sup2:S, LED, MaverickKey, POR, PWM, WDT
• Number Of I /o: 19
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 3.6 V
• Data Converters: A/D 5x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 208-LQFP
• Controller Family/series: (ARM9)
• No. Of I/o's: 19
• Ram Memory Size: 16MB
• Cpu Speed: 200MHz
• No. Of Timers: 3
• No. Of Pwm Channels: 1
• Digital Ic Case Style: LQFP
• Embedded Interface Type: AC97, I2S, SPI, UART, USB
• Rohs Compliant: Yes
• Processor Series: EP93xx
• Core: ARM920T
• Data Bus Width: 32 bit
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: EDB9302A-Z
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 598-1132 - KIT DEVELOPMENT EP9302 ARM9
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 598-1253

DS785UM1
23.5.6 Motorola
23.5.6.1 SPO Clock Polarity
23.5.6.2 SPH Clock Phase
23.5.7 Motorola SPI Format with SPO=0, SPH=0
SFRMOUT /
SCLKOUT /
The Motorola SPI interface is a four-wire interface where the SFRMOUT signal behaves as a
slave select. The main feature of the Motorola SPI format is that the inactive state and phase
of the SCLKOUT signal are programmable through the SPO and SPH bits within the control
register,
When the SPO clock polarity control bit is LOW, it produces a steady state low value on the
SCLKOUT pin. If the SPO clock polarity control bit is HIGH, a steady state high value is
placed on the SCLKOUT pin when data is not being transferred.
The SPH control bit selects the clock edge that captures data and allows it to change state. It
has the most impact on the first bit transmitted by either allowing or not allowing a clock
transition before the first data capture edge.
When the SPH phase control bit is LOW, data is captured on the first clock edge transition. If
the SPH clock phase control bit is HIGH, data is captured on the second clock edge
transition.
Single and continuous transmission signal sequences for Motorola SPI format with SPO=0,
SPH=0 are shown in
SFRMIN
SCLKIN
SSPTXD
SSPRXD
SSPOE
Figure 23-3. Motorola SPI Frame Format (Single Transfer) with SPO=0 and SPH=0
“SSPCR0” on page
®
SPI Frame Format
MS B
MS B
Figure 23-3
23-13.
Copyright 2007 Cirrus Logic
and
Figure 23-4 on page
4 t o 16 bi t s
23-6.
Synchronous Serial Port
EP93xx User’s Guide
LS B
LS B
Q
23-5
23