EP9302-IQZ Cirrus Logic Inc, EP9302-IQZ Datasheet - Page 244

• Manufacturer Part Number: EP9302-IQZ
• Description: IC ARM9 SOC PROCESSOR 208LQFP
• Manufacturer: Cirrus Logic Inc
• Series: EP9r

Specifications of EP9302-IQZ

• Core Size: 16/32-Bit
• Core Processor: ARM9
• Speed: 200MHz
• Connectivity: EBI/EMI, Ethernet, I²C, IrDA, SPI, UART/USART, USB
• Peripherals: AC'97, DMA, I&sup2:S, LED, MaverickKey, POR, PWM, WDT
• Number Of I /o: 19
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 3.6 V
• Data Converters: A/D 5x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 208-LQFP
• Controller Family/series: (ARM9)
• No. Of I/o's: 19
• Ram Memory Size: 16MB
• Cpu Speed: 200MHz
• No. Of Timers: 3
• No. Of Pwm Channels: 1
• Digital Ic Case Style: LQFP
• Embedded Interface Type: AC97, I2S, SPI, UART, USB
• Rohs Compliant: Yes
• Processor Series: EP93xx
• Core: ARM920T
• Data Bus Width: 32 bit
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: EDB9302A-Z
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 598-1132 - KIT DEVELOPMENT EP9302 ARM9
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 598-1253

7
7-62
Raster Engine With Analog/LCD Integrated Timing and Interface
EP93xx User’s Guide
DAT:
Copyright 2007 Cirrus Logic
Smart Panel R/W and RS signals must be implemented
via GPIOs and controlled via software. The difference
between the CNT[3:0] value and the ESTRT[3:0] value is
what guarantees set up time for these GPIO signals to the
Smart Panel before the rising edge of the E enable signal
on the E pin.
Data - Read Only
This parallel interface data is input to the EP93xx
processor from the Smart Panel during a read cycle (see
RD bit in the
bits from the Smart Panel are loaded into this DAT field,
respectively, on the falling edge of the ‘E’ enable control
signal on the E pin.
Writing PIFEN = ‘1’ to the
the signals on these pins for Parallel Interface (Smart
Panel) operation:
V_CSYNC --> D7 (Smart Panel)
HSYNC --> D6
BLANK --> D5
P17 --> D4
P3 --> D3
P[2:0] --> D[2:0]
SPCLK --> E
Smart Panel R/W and RS signals must be implemented
via GPIOs and controlled via software.
ParllIfOut
register for read cycle). The D[7:0]
VideoAttribs
register redefines
DS785UM1