EP9302-IQZ Cirrus Logic Inc, EP9302-IQZ Datasheet - Page 713

• Manufacturer Part Number: EP9302-IQZ
• Description: IC ARM9 SOC PROCESSOR 208LQFP
• Manufacturer: Cirrus Logic Inc
• Series: EP9r

Specifications of EP9302-IQZ

• Core Size: 16/32-Bit
• Core Processor: ARM9
• Speed: 200MHz
• Connectivity: EBI/EMI, Ethernet, I²C, IrDA, SPI, UART/USART, USB
• Peripherals: AC'97, DMA, I&sup2:S, LED, MaverickKey, POR, PWM, WDT
• Number Of I /o: 19
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 3.6 V
• Data Converters: A/D 5x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 208-LQFP
• Controller Family/series: (ARM9)
• No. Of I/o's: 19
• Ram Memory Size: 16MB
• Cpu Speed: 200MHz
• No. Of Timers: 3
• No. Of Pwm Channels: 1
• Digital Ic Case Style: LQFP
• Embedded Interface Type: AC97, I2S, SPI, UART, USB
• Rohs Compliant: Yes
• Processor Series: EP93xx
• Core: ARM920T
• Data Bus Width: 32 bit
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: EDB9302A-Z
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 598-1132 - KIT DEVELOPMENT EP9302 ARM9
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 598-1253

DS785UM1
23.1 Introduction
23.2 Features
The Synchronous Serial Port (SSP) is a master or slave interface for synchronous serial
communication with slave peripheral devices that have either Motorola
Semiconductor
The SSP performs serial-to-parallel conversion on data received from a peripheral device.
The CPU or DMA reads and writes data and control and status information. The transmit and
receive paths are buffered with internal FIFO memories allowing up to eight 16-bit values to
be stored independently in both transmit and receive modes. Serial data is transmitted on
SSPTXD and received on SSPRXD.
Following is a list of features of the Synchronous Serial Port.
The SSP has a programmable choice of interfaces: SPI, Microwire, or TI synchronous serial.
The features of each of these are listed below.
• Master or Slave operation
• Programmable clock bit rate and prescaler
• Separate transmit and receive FIFO memory buffers, 16-bits wide, 8 locations deep
• Programmable data frame size from 4 to 16 bits
• Independent masking of transmit FIFO, receive FIFO and receive overrun interrupts
• SPI features:
• The feature of the National Semiconductor Microwire interface is:
• Texas Instrument synchronous serial interface features:
• Full duplex, four-wire synchronous transfers
• Programmable clock polarity and phase
• Half duplex transfer using 8-bit control message
• Full duplex four-wire synchronous transfer
• Transmit data pin can be in high impedance state when not transmitting
®
Microwire
™
, or Texas Instruments
Copyright 2007 Cirrus Logic
23Synchronous Serial Port
®
synchronous serial interfaces.
®
SPI, National
Chapter 23
23-1
23