HD6417750RF200DV Renesas Electronics America, HD6417750RF200DV Datasheet - Page 226

• Manufacturer Part Number: HD6417750RF200DV
• Description: MPU 1.5/3.3V 0K I-TEMP PB-FREE 2
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7750r

Specifications of HD6417750RF200DV

• Core Processor: SH-4
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: EBI/EMI, FIFO, SCI, SmartCard
• Peripherals: DMA, POR, WDT
• Number Of I /o: 28
• Program Memory Type: ROMless
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.35 V ~ 1.6 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 208-QFP Exposed Pad, 208-eQFP, 208-HQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -

Section 4 Caches
2. OC address array write (non-associative)
3. OC address array write (associative)
Rev.7.00 Oct. 10, 2008 Page 140 of 1074
REJ09B0366-0700
Legend:
V: Validity bit
U: Dirty bit
A: Association bit
Address field
The tag, U bit, and V bit specified in the data field are written to the OC entry corresponding to
the way and the entry set in the address field. The A bit in the address field should be cleared
to 0.
When a write is performed to a cache line for which the U bit and V bit are both 1, after write-
back of that cache line, the tag, U bit, and V bit specified in the data field are written.
When a write is performed with the A bit in the address field set to 1, the tag for each of the
ways stored in the entry specified in the address field is compared with the tag specified in the
data field. The way number set by bit [14] is not used. If the MMU is enabled at this time,
comparison is performed after the virtual address specified by data field bits [31:10] has been
translated to a physical address using the UTLB. If the addresses match and the V bit for that
way is 1, the U bit and V bit specified in the data field are written into the OC entry. This
operation is used to invalidate a specific OC entry. In other cases, no operation is performed. If
the OC entry U bit is 1, and 0 is written to the V bit or to the U bit, write-back is performed. If
an UTLB miss occurs during address translation, or the comparison shows a mismatch, an
exception is not generated, no operation is performed, and the write is not executed. If a data
TLB multiple hit exception occurs during address translation, processing switches to the data
TLB multiple hit exception handling routine.
Data field
: Reserved bits (0 write value, undefined read value)
31
31
1 1 1 1 0 1 0 0
Figure 4.14 Memory-Mapped OC Address Array
24
23
Tag
15
Way
14
13
10 9
Entry
5 4 3 2 1 0
A
2
U
1 0
V