MCP1631RD-DCPC1 Microchip Technology, MCP1631RD-DCPC1 Datasheet - Page 35

• Manufacturer Part Number: MCP1631RD-DCPC1
• Description: REF DES BATT CHARG OR LED DRIVER
• Manufacturer: Microchip Technology

Specifications of MCP1631RD-DCPC1

• Current - Output / Channel: 700mA
• Outputs And Type: 1, Non-Isolated
• Features: Firmware for Li-Ion, NiMH, and NiCd Battery Charger
• Voltage - Input: 3.5 ~ 16 V
• Utilized Ic / Part: MCP1631HV, PIC16F616
• Core Chip: MCP1631HV, PIC16F616
• Topology: Parallel, Series
• Output Current: 1A
• No. Of Outputs: 1
• Input Voltage: 3.5V To 16V
• Dimming Control Type: Analog
• Kit Contents: Board
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Voltage - Output: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

REGISTER 4-4:
REGISTER 4-5:
© 2009 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-6
bit 5-4
bit 3
bit 2-0
Note 1:
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-6
bit 5-0
Note 1:
U-0
U-0
—
—
2:
3:
4:
2:
Global RAPU must be enabled for individual pull-ups to be enabled.
The weak pull-up device is automatically disabled if the pin is in Output mode (TRISA = 0).
The RA3 pull-up is enabled when configured as MCLR and disabled as an input in the Configuration
Word.
WPUA<5:4> always reads ‘1’ in XT, HS and LP Oscillator modes.
Global Interrupt Enable (GIE) must be enabled for individual interrupts to be recognized.
IOCA<5:4> always reads ‘1’ in XT, HS and LP Oscillator modes.
Unimplemented: Read as ‘0’
WPUA<5:4>: Weak Pull-up Control bits
1 = Pull-up enabled
0 = Pull-up disabled
Unimplemented: Read as ‘0’
WPUA<2:0>: Weak Pull-up Control bits
1 = Pull-up enabled
0 = Pull-up disabled
Unimplemented: Read as ‘0’
IOCA<5:0>: Interrupt-on-change PORTA Control bit
1 = Interrupt-on-change enabled
0 = Interrupt-on-change disabled
U-0
U-0
—
—
WPUA: WEAK PULL-UP PORTA REGISTER
IOCA: INTERRUPT-ON-CHANGE PORTA REGISTER
W = Writable bit
‘1’ = Bit is set
W = Writable bit
‘1’ = Bit is set
WPUA5
IOCA5
R/W-1
R/W-0
PIC16F610/616/16HV610/616
WPUA4
IOCA4
R/W-1
R/W-0
U = Unimplemented bit, read as ‘0’
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
‘0’ = Bit is cleared
IOCA3
R/W-0
U-0
—
WPUA2
IOCA2
R/W-1
R/W-0
x = Bit is unknown
x = Bit is unknown
WPUA1
IOCA1
R/W-1
R/W-0
DS41288F-page 35
WPUA0
IOCA0
R/W-1
R/W-0
bit 0
bit 0